| Cover |
1 |
| A Comparative Study of Crack Propagation in Plates under Extension and Bending - Fazil Erdogan, Richard Roberts |
2 |
| A Heuristic Approach to the Theory of Fatigue Fracture as Dual to Yielding - Sitiro Minagawa |
14 |
| A Limit Approach to the Prevention of Pressure Vessel Failure - R. W. Nichols, W. E. Irvine, A. Quirk, E. Bevitt |
19 |
| Continuum Mechanics and Range of Atomic Cohesion Forces - E. Kroner |
39 |
| A Comparative Study of Crack Propagation in Plates under Extension and Bending - F. Erdogan, R. Roberts |
43 |
| A Heuristic Approach to the Theory of Fatigue - S. Minagawa |
55 |
| An Examination of the Fracture Mechanics Energy Balance from the Point of View of Continuum Mechanics - J. Rice |
60 |
| Application of Electron Fractography and Fracture Mechanics to Fatigue Crack Propagation - R.W. Hertzberg, P.C. Paris |
77 |
| Biaxial Tension, Distributed Dislocation Cores and Fracture in Bubble Rafts - F.A. McClintock, W.R. O'Day, Jr. |
88 |
| Continuum Mechanics and Range of Atomic Cohesion Forces - E. Kroner |
101 |
| Crack Extension and Propagation under Plane Stress - A.R. Rosenfield, P.K. Dai, G.T. Hahn |
105 |
| Crack Initiation and Propagation in Notched Fatigue Specimens - S.S. Manson, M.H. Hirschberg |
124 |
| Flexural Problems of Cracks in Mixed Media - G.C. Sih |
135 |
| Fracture at Stress Concentrations - E. Smith |
146 |
| Interaction between Elastic Cracks, Dislocation Cracks and Slip Bands - T. Yokobori. M. Yokobori, M. Ichikawa, M. Ohashi |
156 |
| On Deformation and Strength - C.C. Hsiao, C.S. Ting |
169 |
| On the Concepts of Dual Incompatibility and Dual Dislocation in Relation to Fracture Problem - S. Amari |
174 |
| On the Geometrical Approach to the Micromechanics of Fracture - K. Kondo |
178 |
| Plastic Shear Flow in Asymmetrically Notched - A. Guillen-Preckler, F.A. McClintock, R.D. White |
191 |
| Elasto-plastic stresses and strains in cracked plates - J.L. Swedlov, M.L. Willliams, W. H. Yang |
199 |
| Rate of Growth of Fatigue Cracks Calculated from the Theory of Infinitesimal Dislocations Distributed on a Plane - J. Weertman |
225 |
| Stationary Crack and Continuous Distributions - L.M. Keer, T. Mura |
232 |
| The Effect of the Number of Deformation Modes on the Ductile-Brittle Transition Criterion in Solids - E. Smith, P.J. Worthington |
241 |
| The Influence of Elastic Anisotropy on the Propagation of Fracture - C. Atkinson, A.K. Head |
247 |
| The Interactions of Cracks and Dislocations I. Screw Dislocations - N. Louat |
255 |
| The Mechanism of Energy Dissipation at Brittle - G.M. Bartenev |
264 |
| The Non-Thermal and Thermal Processes of Fracture and Time Dependent Strength of Brittle Solids - G.M. Bartenev |
268 |
| The Propagation of Brittle Fracture - T.A.C. Stock, P.L. Pratt |
276 |
| Yielding Initiation Process and Its Effect on Fracture of Cracked Plate and Fatigue Damage Nucleation - H.W. Liu |
284 |
| Analysis of Pre-existing Flaw of Material by Optical Double Diffraction Method - G. Shinoda, T. Suzuki, M. Mino, R. Nagata |
296 |
| Anisotropy of Fatigue Crack Propagation of a Low Alloy Steel - J. Watanabe, Y. Kumada |
302 |
| Cleavage Crack Propagation - J. Plateau, J. Henry, J. Friedel |
306 |
| Cleavage Fracture of Iron Single Crystals - K. Kitajima |
314 |
| Crack Resistance Properties of High Strength Aluminum Alloys - C.M. Carman, D.F. Armiento, H. Markus |
324 |
| Crack Velocity in Plastics - K. Saito, H. Mishina |
347 |
| Decomposition Reactions in Gold-Platinum Alloys and Their Effects on Strength and Fracture Characteristics - E.R. Parker, R.W. Carpenter, V.F. Zackay |
354 |
| Direct Observation for High-Temperature Fatigue in Pure Metals by Means of Microscopic Cine-Camera - S. Takeuchi, T. Homma |
361 |
| Dynamic Criteria for Crack Nucleation and Growth - J.J. Oilman |
370 |
| Effect of Carbon on Dislocation Structure of Iron Microcrystals - LP. Kushnir, Y.A. Ossipjan |
378 |
| Fatigue Fracture of Cu and Cu-Alloy Single Crystal - J. Rudolph, P. Haasen, B.L. Mordike, P. Neumann |
382 |
| Fracture in the Process of Stress-Relaxation under Constant Strain - H. Nakamura, T. Nakaiti, H. Okabayashi |
390 |
| Fracture Mechanisms and Fracture Surface Topography - H.C. Burghard, Jr., D.L. Davidson |
399 |
| Fracture of Amorphous Polymers - R.F. Landel, R. F. Fedors |
413 |
| Fracture Studies of Polypropylene - K. D. Pae, D. R. Morrow, J.A. Sauer |
419 |
| Grain Boundary Sliding in Zinc and Zinc-Copper Bicrystals - J. O. Brittain, N. R. Adsit |
428 |
| Initiation and Growth of Viscoelastic Fracture - M.L. Williams |
430 |
| Kinetic Concept of the Strength of Solids - S. N. Zhurkov |
445 |
| Metallographic Studies of Ductile Fracture in High Purity Aluminium and Lead - D.R. Miller, F.M.C. Besag |
455 |
| Micro and Macro Crack Formation - B.L. Averbach |
462 |
| Micro-Plasticity of Uranium Dioxide at Room Temperature - N. Igata, R.R. Hasiguti, K. Domoto |
479 |
| On the Mechanism of Cleavage Fracture of Crystals - K. Kitajima |
488 |
| Precipitation-Strengthening and Toughening Effect of Aluminum Nitride on Low-Carbon Structural Steels - H. Nakamura, N. Ujiiye |
495 |
| Relation between Steel Purity and Tensile. Creep and Fatigue Properties - A. Buch |
502 |
| State of Strain Around the Tip of a Fatigue Crack - M. Suzuki, H. Takahashi |
511 |
| Strain- Rate- Dependent Breaking Strength of Polymethyl Methacrylate - M. Huguchi |
513 |
| Structure and Theoretical Strength of Glass - G.K. Demishev, G.M. Bartenev |
523 |
| Studies of the Brittle Fracture of Steel during the past Twenty Years - N.P. Allen |
527 |
| Tensile and Torsional Fracture of Low Carbon Steel at Liquid Nitrogen Temperature - T. Yokobori, M. Ichikawa |
543 |
| The Analysis of Fracture Surfaces by Electron Microscopy - R.M.N. Pelloux, J.C. McMillan |
559 |
| The Effect of Small Drilled Holes of the Notch Toughness of Iron Base Alloys - A.S. Tatelman, C.A. Ran, Jr. |
571 |
| The Effect of Temperature and Strain-rate on the Deformation and Fracture of Mild-steel Charpy Specimens - T. R. Wilshaw, P.L. Pratt |
581 |
| The Fine Structure in Deformation Bands in Mild Steel - B.S. Kasatkin |
591 |
| The Fracture of Martensite - W.E. Duckworth, M.J. May, J.J. Irani |
597 |
| The Fracture of Polycrystalline Iron - C.J. McMahon, Jr., M. Cohen |
608 |
| The High Strength State of Glass - F.F. Vitman, G. S. Pugachyov, V.P. Pukh |
626 |
| The Mechanical Properties as a Function of Temperature and Free Electron Concentration in Stoichiometric TiXi, TiCo and TiFe Alloys - F.E. Wang |
633 |
| The Mechanical Strength of Damage-free Sheet Glass - M. Hara |
639 |
| The Role of Cross-Slip in Brittle Fracture and Fatigue - A.J. McEvily, Jr., T.L. Johnston |
642 |
| The Strength and Toughness of Dynamically Strain Aged Alloy Steels - V.F. Zackay, W.W. Gerberich, R. Busch, E. R. Parker |
659 |
| The Time Dependent Fracture of Viscoelastic Materials - W.G. Knauss |
671 |
| Twinning, Slip and Brittle Fracture in Very Low Carbon Iron - R. Honda |
686 |
| A Limit Approach to the Prevention of Pressure Vessel Failure - R.W. Nichols, W. H. Irvine, A. Quirk, E. Bevitt |
694 |
| A Note on the Environmental Stress-Cracking of Polyethylene: Effect of Temperature on the Time to Crack - Y. SUezawa, H. Hojo, T. Ikeda, Y. Okamura |
714 |
| A Possible Macro-Mechanism for Cleavage Fracture Initiation in Mild Steel - B. Cotterell |
716 |
| Correlation Between Electrical and Mechanical Breakdown in Chain-Polymer Solids - M. Toyoda |
722 |
| Crack Propagation of Notched Specimen with Residual Compressive Stress - T. Kunio, H. Nakamura, M. Shimizu |
724 |
| Cyclic Strain and Fatigue Behavior of Metals in the Creep Range - L.F. Coffin, Jr. |
731 |
| Deformation Behavior and Fracture of Nimonic 80A During Thermal Fatigue Cycling Under Constraint - E. Krempl |
744 |
| Effect of Capillary Action on Fracture Due to Liquid Metal Embrittlement - N. Perrone, H. Liebowitz |
758 |
| Effect of Hydrogen Environment on Creep and Fracture of Steels - F. H. Vitovee |
763 |
| Effect of Hydrostatic Pressure on Dislocation Arrangement in Metals - N. Inoue, M. Nishihara |
772 |
| Embrittlement of Silver Chloride by Copper Chlorocomplexes - A. R. C. Westwood, D. L. Goldheim |
775 |
| Existence of a Defect and Its Influence Upon Mechanical Properties - Y. Asakawa |
784 |
| Fatigue Fracture of Vacuum-Melted Ball Bearing Steel - T. Yokobori, M. Nanbu |
787 |
| Fatigue under Pulsating Hydrostatic Pressure - W.N. Findley, J.F. Tracy |
795 |
| Fracture in a Tensile Specimen - J.I. Bluhm, K.J. Morrissey |
802 |
| Fracture Mechanics and Radiation Embrittlement - A. M. Sullivan |
825 |
| Fracture Mechanics Approach to Brittle Fracture Propagation-Arrest in Structural Steel - M. Yoshiki, T. Kanazawa, S. Machida |
836 |
| Fracture of Ceramics - V. Weiss, R. Chait, J.G. Sessler |
844 |
| Fracture of Uranium Dioxide - J. L. Daniel, S. Takahashi |
852 |
| Fracture under Biaxial Conditions in the Presence of a Crack - S.R. Valluri |
858 |
| Growth of Fracture in Metal Under Random Cyclic loading - R.H. Christenseu |
865 |
| Interfaces between Fatigue, Creep, and Fracture - S.S. Manson |
871 |
| Interrelation Between Thermal and Elevated Temperature Fatigue Resistance of AISI 347 Stainless Steel - N. Katoh |
894 |
| Limit of Cold Working and Flow-Curve of Ductile Metals - K. Takase |
902 |
| Low-Cycle Fatigue by Constant Amplitude True Mean Stress - L.F. Gillemot |
910 |
| Micro-Structure of Hard Materials Deformed and Fractured under High Pressure - S. Takahashi, N. Asami, Y. Honda, B. Ishii |
919 |
| On Fatigue Failure of a Multiple-Load-Path Redundant Structure - A.M. Freudenthal, M. Shinozuka |
928 |
| On Internal Fracture of Solids - C.C. Hsiao, S.R. Moghe, G.C. Soong, W.L. Yin |
935 |
| On Some Theoretical and Experimental Investigation of High Speed Plastic Deformation - K. Kawata, S. Fukui, J. Seino |
953 |
| Optimum Hardness for Maximum Fatigue Strength of Steel - J. Morrow, G.R. Halford, J.F. Millan |
958 |
| Photographic Study of Crack Propagation in Glass Plates in Controlled Environments - S. Hyodo, H. Nakatsuka |
971 |
| Plastic Accommodation at Micro Stress Concentrations - A.S. Argon |
975 |
| Plastic Flow and Crack Nucleation in Magnesium Oxide - A. Briggs, F.J.P. Clarke |
982 |
| Slip Fracture and Shear Strength of Bentonite Gels - R. Gotoh, K. Shunizu |
986 |
| Some Contributions to the Present Aspects of the Mechanism of Stress-Corrosion Embrittlement - S. Kishima |
991 |
| Some Effects of Hydrostatic Pressure on Yielding and Brittleness in Iron and Chromium - F. P. Bullen, H. L. Wain |
1011 |
| Static and Fatigue Fractures of Portland Cement Mortar in Flexure - J. Glucklich |
1020 |
| Statistical Aspects of Hardness Distribution of Mild Steel under Repeated Loading - S. Tanaka, S. Sasaki |
1041 |
| The Effect of Oxygen Adsorption on the Fatigue Behaviour of Lead Single Crystals+Polycrystals - K. U. Snowden |
1048 |
| The Formation of Necking in Polycrystalline Steel - P.S. Theocaris, E. Marketos |
1055 |
| The Growth of Fatigue Cracks - N.E. Frost |
1069 |
| The Theory of Time Dependent Strength of Solids in Surface-Active Media - G.M. Bartenev, I.V. Razmmovskaya |
1083 |
| Transient Analysis in a Fracturing Epoxy Plate with a Central Notch - A.S. Kobayashi, W.B. Bradley, R.A. Selby |
1089 |
| Variations in the Embrittlement of Irradiated Pressure Vessel Steels - E.T. Wessel |
1101 |
| X-Ray Investigation on Fatigue of Metals - S. Taira, K. Honda |
1110 |