13th International Conference on Fracture June 16–21, 2013, Beijing, China -9- [11] J. M. M. Molenaar, A.A.A. Molenaar, X. Liu, Resistance to crack-growth and fracture of asphalt mixture. In: 6th international RILEM symposium on performance testing and evaluation of bituminous materials; 2003. pp. 618–25. [12] X. Chen, W. Li, H. Li, Evaluation of fracture properties of epoxy asphalt mixtures by SCB test. J Southeast Univ, 25, (2009) 527–530. [13] M. Novak, B. Birgisson, R. Roque. Near-surface stress states in flexible pavements using measured radial tire contact stresses and ADINA. Comp Struct, 81, (2003), 859–870. [14] X. J. Li, M. O. Marasteanu, The fracture process zone in asphalt mixture at low temperature. Engng Fract Mech 77, (2010) 1175–1190. [15] M. Fakhri, M. Farokhi, P. T. Kheiry, Modeling of top-down cracking (TDC) propagation in sphalt concrete pavements using fracture mechanics theory. Adv Test Charact Bituminous Mater II, (2009) 681–692. [16] M.R. Ayatollahi, M.R.M. Aliha, Wide range data for crack tip parameters in two disc-type specimens under mixed mode loading, Comp Mater Sci, 38, (2006) 660-670. [17] I. Lim, I. W. Johnston, S.K. Choi, Stress intensity factors for semi-circular specimens under three-point bending, Engng Fract Mech, 3, (1993) 363–82.
RkJQdWJsaXNoZXIy MjM0NDE=