References [1] Dooley, J. J., Dahowski, R. T., Davidson, C. L. (2009). Comparing existing pipeline networks with the potential scale of future U.S. CO2 pipeline networks, Energy Procedia, 1, 1595-1602. [2] Pluvinage, G. (2007). General approaches of pipeline defect assessment in Safety, Reliability and Risks associated with water, oil and Gas pipelines, Edited by Pluvinage, G. and Elwany, M., Springer, 1-22. [3] API 579-1/ASME FFS-1 (2007). Fitness for Service, American Society of Mechanical Engineers, Houston. [4] Hadj Meliani, M., Matvienko, Y.G., and Pluvinage, G. (2011). Corrosion defect assessment on pipes using limit analysis and notch fracture mechanics, Engineering Failure Analysis, 18, 271-283. [5] Kloster, G., Probst-Hein, M. (2012). X65 steel for seamless line pipe and risers for on- and offshore projects, Vallourec and Mannesmann Tubes, Düsseldorf, Accessed on June 8, 2012 at www.vmtubes.com. [6] AFNOR standard: NF EN 10002-1 (1990). Matériaux métalliques. Essai de traction, Association Française de Normalisation, Saint Denis La Pleine. [7] AFNOR standard: NF EN ISO 14556 (2001). Acier. Essai de flexion par choc sur éprouvette Charpy à entaille en V. Méthode d’essai instrumentée, Association Française de Normalisation, Saint Denis La Pleine. [8] Green, A. P., and Hundy, B. B. (1956). Initial plastic yielding in notch bend tests, Journal of Mechanics and Physics of Solids, 4, 128-144. [9] ASTM E1921-11a, (2003). Standard Test Method for Determination of Reference Temperature, T0 for Ferritic Steels in the Transition Range, American Society for Testing and Materials, Philadelphia. [10] Ruggieri, C., Gao, X., and Dodds, R. H., (2000). Transferability of elastic-plastic fracture toughness using the Weibull stress approach: significance of parameter calibration; Engineering Fracture Mechanics, 67, 101-117. [11] Henry, B. S., Luxmore, A. R. (1997). The stress triaxiality constraint and the Q-value as a ductile fracture parameter, Engineering Fracture Mechanics, 57, pp. 375-390. [12] Betegon, C., and Hancock, J. W. (1991). Two parameter characteristics of elastic– plastic crack-tip fields, Journal of Applied Mechanics, 58, 104–101. [13] Hadj Meliani, M., Matvienko, Y. G., Pluvinage, G. (2011). Two-parameter fracture criterion (Kρ, χ-Tef,c) based on notch fracture mechanics, International Journal of Fracture, 167, 173-182.
RkJQdWJsaXNoZXIy MjM0NDE=