13th International Conference on Fracture June 16–21, 2013, Beijing, China -7- [12] HUTCHINSON J W. Singular behavior at the end of a tensile crack in a hardening material[J]. Journal of the Mechanics and Physics of Solids, 1968, Vol. 16: 13-31. [13] RICE J R, ROSENGREN G F. Plane strain deformation near a crack tip in a power law hardening material[J]. Journal of the Mechanics and Physics of Solids, 1968, Vol. 16: 1-12. [14] BEGLEY J A, LANDES J D. The J-integral as a fracture criterion[C]. Fracture Mechanics, ASTM STP 515, ASTM International, West Conshohocken, PA, 1972: 1-23. [15] LANDES J D, BEGLEY J A. The effect of specimen geometry on JIC[C]. Fracture Mechanics, ASTM STP 515, ASTM International, West Conshohocken, PA, 1972: 24-39. [16] RICE J R, PARIS P C, MERKLE J G. Some further results of J-integral analysis and estimates[C]. Progress in Flaw Growth and Fracture Toughness Testing, ASTM STP 536, ASTM International, West Conshohocken, PA, 1973: 231-245. [17] SUMPTER J D, TURNER C E. Method for laboratory determination of JC (contour integral for fracture analysis)[C]. Cracks and Fracture, ASTM STP 61, ASTM International, West Conshohocken, PA, 1976: 3-18. [18] ERNST H A, PARIS P C, LANDES J D. Estimations on J-integral and tearing modulus T from a single specimen test record[C]. Fracture Mechanics: 13th Conference, ASTM STP 743, ASTM International, West Conshohocken, PA, 1981: 476-502. [19] ZHU X K, LEIS B N, JOYCE J A. Experimental estimation of J-R curves from load-CMOD record for SE(B) specimens[J]. ASTM Special Technical Publication, 2008, 5(5): 66-75.
RkJQdWJsaXNoZXIy MjM0NDE=