13th International Conference on Fracture June 16–21, 2013, Beijing, China -10- p. 17634-17639. 24. Blacklock, M., et al., Generating virtual textile composite specimens using statistical data from micro-computed tomography: 1D tow representations for the Binary Model. Journal of the Mechanics and Physics of Solids, 2012. 60: p. 451-470. 25. Rinaldi, R., et al., Generating virtual textile composite specimens using statistical data from micro-computed tomography: 3D tow representations. Journal of the Mechanics and Physics of Solids, 2011. in press. 26. Cox, B.N., W.C. Carter, and N.A. Fleck, A Binary Model of textile composites: I Formulation. Acta Metallurgica et Materialia, 1994. 42: p. 3463-3479. 27. Bale, H.A., et al., Real-Time Quantitative Imaging of Failure Events in Ultrahigh-Temperature Materials under Load at Unprecedented Temperatures above 1700°C. Nature Materials, 2012. in press. 28.Zi, G. and T. Belytschko, New crack-tip elements for XFEM and applications to cohesive cracks. International Journal for Numerical Methods in Engineering, 2003. 57: p. 2221-2240. 29. Hansbo, A. and P. Hansbo, A finite element method for the simulation of strong and weak discontinuities in solid mechanics. Computational Methods in Applied Mechanics and Engineering, 2004. 193: p. 3523-3540. 30. Andersson, T. and U. Stigh, The stress–elongation relation for an adhesive layer loaded in peel using equilibrium of energetic forces. International Journal of Solids and Structures, 2004. 41(2): p. 413-434. 31. Moës, N., J. Dolbow, and T. Belytschko, A finite element method for crack growth without remeshing. International Journal for Numerical Methods in Engineering, 1999. 46: p. 131-150. 32. Strouboulis, T., K. Copps, and I. Babuška, The generalized finite element method. Computational Mechanics Advances, 2001. 190: p. 4801-4193. 33. Fang, X.J., et al., An augmented cohesive zone element for arbitrary crack coalescence and bifurcation in heterogeneous materials. International Journal of Numerical Methods in Engineering, 2011. 88: p. 841-861. 34. Ling, D., Q. Yang, and B.N. Cox, An augmented finite element method for modeling arbitrary discontinuities in composite materials. International Journal of Fracture, 2009. 156: p. 53-73. 35. Liu, W., et al., An Accurate and Efficient Augmented Finite Element Method for Arbitrary Crack Interactions. Journal of Applied Mechanics, 2012. in press. 36. Metropolis, N. and S. Ulam, The Monte Carlo method. Journal of the American Statistical Association, 1949. 44: p. 335-341. 37. Cox, B.N., Inductions from Monte Carlo simulations of small fatigue cracks. Engineering Fracture Mechanics, 1989. 33: p. 655-670. 38. Cox, B.N., W.J. Pardee, and W.L. Morris, A statistical model of intermittent short fatigue crack growth. Fatigue and Fracture of Engineering Materials and Structures, 1987. 9(6): p. 435-455. 39. Pardee, W.J., et al., Statistical Mechanics of Early Growth of Fatigue Cracks, in 2nd Int. Symp. on Defects, Fracture and Fatigue. 1982: Mont Gabriel, Canada. p. 99-111. Acknowledgments This work was supported by the Air Force Office of Scientific Research (Dr. Ali Sayir) and NASA (Dr. Anthony Calomino) under the National Hypersonic Science Center for Materials and Structures (AFOSR Contract No. FA9550-09-1-0477). We acknowledge the use of data from the x-ray synchrotron micro-tomography beam line (8.3.2) at the Advanced Light Source (ALS) at the Lawrence Berkeley National Laboratory (US Dept. of Energy, contract No. DE AC02 05CH11231).
RkJQdWJsaXNoZXIy MjM0NDE=