13th International Conference on Fracture June 16–21, 2013, Beijing, China -10- 11. R.V. Goldstein, N.M. Osipenko, Fracture structures in the vicinity of microscopic longitudinal shear / / Mechanics of Solids. 2012. Number 5. Pp. 22-34. 12. R.V. Goldstein, N.M. Osipenko, Structures of fracture near a longitudinal shear main crack. In: Proc. 19th European Conference on Fracture (ECF19), August 26-31, 2012, Kazan, Russia. CD Proceedings ID400. 13. O.B. Naimark, M.M. Davydova, O.A. Plekhov, S. Uvarov, Experimental and theoretical study of dynamic stochasticity and scaling at crack propagation / / Phys. Mesomech. - 1999. - Vol. 2. - № 3. - P. 47-58 14. M.M. Davydova, Experimental study of glass fragmentation statistical regularities Physical mesomechanics. 2008. V. 11. Number 5. Pp. 77-82. 15. M. Davydova, S. Uvarov, Fractal Laws for Spatial and Temporal Variables of Brittle Fragmentation / / In: 19th European Conference on Fracture "Fracture Mechanics for Durability, Reliability and Safety", Kazan, Russia, 26-31 August, 2012. Book of Abstracts. Kazan: Foliant, 2012 . P. 123. ISBN 978-5-905576-18-8. 16. M. Davydova, S. Uvarov, Fractal laws for spatial and temporal variables of brittle fragmentation / / In: 19th European Conference on Fracture "Fracture Mechanics for Durability, Reliability and Safety", Kazan, Russia, 26-31 August, 2012. ECF19 Proceedings. (CD) N. 119 [8 pp.]. ISBN 978-5-905576-18-8. 17. I.N. Dashevsky, Crack modeling in a plate under the action of a point indenter / / IX All-Russian Congress of Theoretical and Applied Mechanics. Abstracts. Vol. III. (Nizhny Novgorod, 22-28 August 2006). Nizhny Novgorod: Publishing House of the Nizhny Novgorod State University named after N.I. Lobachevsky, 2006. - P. 81 [in Russian]. 18. I.N. Dashevsky, How many parts the plate will break to? Moscow, 2008. - 25 pp. - (Preprint / RAS. Institute of Problems in Mechanics; № 865) [in Russian]. 19. I.N. Dashevsky, Cracking model in a plate and a wedge under bending by a point indenter. - In. "Problems in Mechanics: Mechanics of Solids." Moscow: Nauka, 2009. Pp. 115-135. ISBN 978-5-02-036961-0 [in Russian]. 20. I.N. Dashevsky, Model of symmetric crack formation in a plate and a wedge under bending by a point indenter / / Mechanics of Solids. 2011. Number 3. Pp. 112-121. 21. I.N. Dashevsky, On the formation of regular cracks systems around a circular hole under uniform compression / / In.: Proceedings of the International Conference "Survivability and Structural Material Science" Zhivkom 2012 (22-24 October 2012). Volume 1. - Moscow, 2012. P. 73-80 [in Russian]. 22. I.N. Dashevsky, On the formation of polar-periodic fracture structures at the boundary of round cavity under hydrostatic pressure. M., 2012. – 20 pp. - (Preprint / RAS. Institute of Problems in Mechanics; № 1027) [in Russian]. 23. A.A. Griffith, The phenomenon of rupture and flow in solids, Phil. Trans. Roy. Soc. A221, 1920, pp. 163-198. 24. A.V. Alexandrov, V.D. Potapov, Fundamentals of the theory of elasticity and plasticity. Vysshaya. shk., Moscow: 1990. 400 pp [in Russian]. 25. V.I. Feodosyev, Strength of Materials. Moscow: Nauka, 1986. 512 p. [in Russian].
RkJQdWJsaXNoZXIy MjM0NDE=