| Cover |
1 |
| The invariant integral: Some news -
Genady P. Cherepanov |
3 |
| The characterization of dominating region of fracture (process region) around a crack tip based on the concept of mechanical similarity and atomic mechanics -
Toshimitsu Yokobori, Yoshiko Nagumo, Takahiro Yajima, Toshihito Ohmi |
12 |
| Numerical and analytical prediction of GB microcrack initiation: Effect of material and microstructure parameters -
Mohamed Ould Moussa, Maxime Sauzay, |
21 |
| Strain concentration in tensile, fatigue and fracture behaviour -
Stephen D. Antolovich, Ronald W. Armstrong |
31 |
| The Cottrell Legacy: Metamorphosis of ICF into the World Academy of Structural Integrity 2011-2021 -
Alberto Carpinteri, David M.R. Taplin |
41 |
| Sir Alan Cottrell and the dislocation mechanics of fracturing -
Ronald W. Armstrong |
45 |
| A pipeline approach to developing virtual tests for composite materials -
Brian Cox, Hrishikesh Bale, Matthew Blacklock |
56 |
| A Vibration Energy Harvester with Internal Impact and Hybrid Transduction Mechanisms -
Songmao Chen |
66 |
| Effects of electric field and poling on the cyclic bending fatigue in cracked piezoceramics -
Yasuhide Shindo, Fumio Narita, Masayuki Sato |
76 |
| Three-phase elliptical inclusions with an internal stress field of linear form -
Xu Wang |
85 |
| Evaluation of strength recovery and analysis of damage progression of notched unidirectional carbon/epoxy composites encompassing selfhealing of interfacial debonding -
Kazuaki Sanada, Yuta Mizuno, Yasuhide Shindo |
95 |
| Anti-plane moving polarization saturation crack in ferroelectric solids -
Hao-Sen Chen, Dai-Ning Fang |
101 |
| Fracture criteria for piezoelectric ceramics -
Leslie Banks-Sills |
111 |
| Experimental and analytical study of the effect of variable amplitude loadings in VHCF regime -
Manuela Sander, Thomas Müller |
118 |
| Is there a threshold for PSB formation in iron -
Chong Wang, Danièle Wagner, Qingyuan Wang, Claude Bathias |
129 |
| Subsurface non defect fatigue crack origin and local plasticity exhaustion -
Guocai Chai |
139 |
| Application of Dang Van criterion to rolling contact fatigue in wind turbine roller bearings -
Michele Cerullo |
149 |
| Effects of microstructure on very-high-cycle fatigue crack initiation and life scatter for a high strength steel -
Zhengqiang Lei, Youshi Hong, Jijia Xie |
159 |
| Very high cycle fatigue for single phase ductile materials: Microplasticity and energy dissipation -
Veronique Favier, Ngoc L. Phung, Nicolas Ranc |
167 |
| Evaluation of an ultrasonic device to test fretting-fatigue in very high cycle regime -
Pedro Filgueiras, Claude Bathias, Ernani Palma |
176 |
| Gigacycle fatigue behaviors in Fusion Zone and Heat Affected Zone of Q345 LA steel welded joints -
Liu Yongjie, Tian Renhui, He Chao |
186 |
| Very high cycle fatigue (VHCF) behavior of structured Al 2024 thin sheets -
Sebastian Stille, Tilmann Beck, Lorenz Singheiser |
196 |
| Effect of yttrium content on the ultra-high cycle fatigue behavior of Mg-Zn-Y-Zr alloys -
Daokui Xu, Enhou Han |
204 |
| Influence of high mean stresses on lifetime and damage of the martensitic steel X10CrNiMoV12-2-2 in the VHCF regime -
Beck Tilmann, Stephan Kovacs, Lorenz Singheiser |
211 |
| Effect of aging condition on fatigue strength of maraging steel in long life region -
Qiang Chen, Qingyuan Wang, Norio Kawagoishi |
221 |
| Influence of deformation-induced alpha prime martensite on the crack initiation mechanism in a metastable austenitic steel in the HCF and VHCF regime -
Martina Zimmermann, Andrei Grigorescu, Carsten Mueller-Bollenhagen |
229 |
| Very high cycle fatigue strength of a high strength steel under sea water corrosion -
Palin-Luc Thierry, Claude Bathias |
238 |
| 3. Experimental results and discussion |
240 |
| Study of fatigue crack mechanism on an armco iron in the gigacycle fatigue by temperature recording and microstructural observations -
Danièle Wagner, Chong Wang, Qingyuan Wang |
248 |
| Defect induced scaling in gigacycle fatigue -
Vladimir Oborin, Mickail Bannikov, Oleg Naimark |
257 |
| The effect of damage accumulation in slip bands on the resonant behavior in the very high cycle fatigue (VHCF) regime -
Philipp Hilgendorff, Andrei Grigorescu, Martina Zimmermann |
263 |
| Very high cycle fatigue behabvior of plasma nitrided 316 stainless steel -
Daisuke Yonekura, Kei Ozaki, Ryota Shibahara |
272 |
| Experimental investigation on effects of various factors on very high cycle fatigue property for spring steels -
Taku Miura, Tatsuo Sakai, Takayuki Sakakibara |
280 |
| Surface crack initiation pehenomenon in very high cycle fatigue -
Muhammad Kashif Khan, Qingyuan Wang |
290 |
| Finite element modeling of the coupling between thermal dissipation and fish-eye crack growth in very high cycle fatigue regime -
Laurent Gallimard, Quan H. Nguyen, Claude Bathias |
300 |
| Investigations of subcritical crack propagation under high cycle fatigue -
Attilio Arcari, Nagaraja Iyyer, Kittur Madan |
306 |
| The significance of two-phase plasticity for the crack initiation process during very high cycle fatigue of duplex steel -
Alexander Giertler, Marcus Söker, Benjamin Dönges |
317 |
| Microplasticity, microdamage, microcracking in ultrasonic fatigue -
C. Bathias, D. Field, S. Antolovich, P.C. Paris |
325 |
| An interaction integral method for 2D elastodynamic crack problems -
Zhiyong Wang, Li Ma, Linzhi Wu |
335 |
| The eXtended Finited Element Method for frictional contact problem -
Zhiqiang Hu, Guogang Fan, Gao Lin |
342 |
| Implementation of the extended finite element method for hydraulic fracture problems -
Zuorong Chen |
352 |
| Thermal shock residual strength of ultra-high temperature ceramics with the consideration of temperature -
Dingyu Li, Weiguo Li, Ruzhuan Wang |
362 |
| UHPC precast product under severe freeze-thaw conditions -
Ming-Gin Lee, Kun-Long Lee, Mang Tia |
370 |
| Novel direct method on the life prediction of component under high temperature—creep fatigue conditions -
Haofeng Chen |
378 |
| Creep crack initiation and growth behavior in weldments of high Cr steels -
Ryuji Sugiura, Toshimitsu Yokobori, Kazuto Sato |
388 |
| Three-dimensional vacancy diffusion analysis related to micro damage of C(T) specimen for P92 steel under creep condition -
Haruhisa Shigeyama, A. Toshimitsu Yokobori Jr., Ryuji Sugiura |
395 |
| Evaluation of creep damage and fracture in high Cr steel welds -
Masaaki Tabuchi |
404 |
| Fracture based testing and modelling, and component fracture based testing and modelling, and component life assessment of welds -
Kamran Nikbin |
411 |
| Integrity increasing of damaged steel pipelines using external and internal reinforcing -
Janos Lukacs, Gyula Nagy, Imre Torok |
423 |
| Based on cycle strain damage prediction of the crack growth behavior of elliptic surface crack -
Long Chen, Lixun Cai, Kaikai Shi |
433 |
| Effect of pitch difference on anti-loosening performance for high strength bolts and nuts -
Xin Chen, Yu-Ichiro Akaishi, Nao-Aki Noda |
443 |
| Research on the new low temperature self-protective pasty boronizing processes of thermal power plant economizer pipe -
Jianjun He, Jian Chen, Yan Ren |
453 |
| LCF behavior and life modeling of DZ125 under complicated load condition at high temperature -
Jia Huang, Xiaoguang Yang, Duoqi Shi |
459 |
| Effect of SiC partilces on fatigue crack propagation of spray-formed SiC particulate-reinforced Al–Si alloy composites -
Wei Li, Jian Chen, Jianjun He |
472 |
| Interlaminar shear strength for three kinds of ceramic matrix composites at 1173K -
Jianjie Gou, Chengyu Zhang, Shengru Qiao |
482 |
| Atomistic simulation of fatigue crack growth in α-Fe under high temperature -
Tong Liu, Minshan Liu |
490 |
| Comparing crack growth testing and simulation results under thermo-mechanical fatigue conditions -
Ramesh Chandwani, Christopher M. Timbrell, Steve Jacques |
501 |
| Reliability of micro/macro-fatigue crack growth behavior in the wires of cable-stayed bridge -
Keke Tang |
511 |
| Development of classical boundary element analysis of fracture mechanics in gradient materials -
Quentin Z.Q. Yue Quentin Z.Q. Yue, Hong Tian Xiao |
521 |
| A BEM for transient coupled thermoelastic crack analysis of homogeneous/functionally graded bimaterials -
Chuanzeng Zhang, Alexander Ekhlakov, Oksana Khay |
530 |
| Crack growth-based fatigue life prediction using spline fictitious boundary element method -
Cheng Su, Chun Zheng |
540 |
| Null-field integral approach for the piezoelectricity problems with arbitrary elliptical inhomogeneities -
Ying-Te Lee, Jeng-Tzong Chen, Shyh-Rong Kuo |
549 |
| Modeling the effect of residual stress on the ductile fracture behavior of an aluminum alloy 5083-H116 -
Xiaosheng Gao, Jun Zhou |
559 |
| Mechanisms for cleavage fracture in duplex stainless steels- Guocai Chai, Peter Stenvall |
569 |
| Cleavage modelling with experimental particle size distribution and novel particle failure criterion -
Andrey P Jivkov, Peter James |
579 |
| Load history effects on fracture toughness of RPV steel -
Jérémy Hure, Benoît Tanguy |
589 |
| Fracture Toughness Predictions Using the Weibull Stress Model with Implications for Estimations of the T0 Reference Temperature -
Claudio Ruggieri, Rafael Savioli, Robert H. Dodds Jr. |
599 |
| A Local Approach to Creep-Fatigue -Oxidation Interactions in Inco 718 Alloy -
André Pineau, Raul De Moura Pinho, Stéphane Pierret |
609 |
| On Modeling of Thermal Embrittlement in PWR Steels using the Local Approach to Fracture -
Antoine Andrieu, André Pineau, Pierre Joly |
620 |
| Hierarchical Damage Simulation to Correlate Micro-structural Characteristics of Steel with Ductile Crack Growth Resistance of Component -
Mitsuru Ohata, Hiroto Shoji, Fumiyoshi Minami |
630 |
| Integrated Damage Mechanics Approach to Brittle and Ductile Crack Propagation -
Geralf Hütter, Thomas Linse, Uwe Mühlich |
640 |
| 1. Introduction |
640 |
| 2. Model |
641 |
| 3. Results |
644 |
| Acknowledgement |
647 |
| References |
647 |
| Application of damage models to the ductile-brittle transition region of Reactor steels -
Thomas Linse, Meinhard Kuna |
648 |
| Application of the Local Approach for Prediction of Ductile Fracture of Highly Irradiated Austenitic Steels -
Boris Margolin, Alexander Sorokin, Victor Kostylev |
658 |
| Stress-Controlled and Stress-and-Strain Controlled Criteria of Brittle Fracture in Local Approach -
Victoria Shvetsova, Boris Margolin, Alexander Gulenko |
669 |
| Scatter of measured KIC related to the scatters of local parameters Xf, σf and εpc -
Jian Hong Chen, Rui Cao |
679 |
| The Elusive Temperature Dependence of the Master Curve -
Kim Wallin |
687 |
| Local Approach Applied to the Fracture Toughness of Resistance Spot Welds -
Florent Krajcarz, Anne-Françoise Gourgues-Lorenzon, Emmanuel Lucas |
696 |
| Analysis of a singular stress field near the edge of joint using molecular dynamics -
Hideo Koguchi, Nobuyasu Suzuki |
706 |
| Chirality and Size Dependent Elastic Properties of Silicene Nanoribbons under Uniaxial Tension -
Yuhang Jing, Yi Sun, Hongwei Niu |
717 |
| Dislocation dynamics analysis of hydrogen embrittlement in alpha iron based on atomistic investigations -
Shinya Taketomi, Honami Imanishi, Ryosuke Matsumoto |
723 |
| Finite Element Simulation of Crack Propagation for α-Ti Based on Cohesive Zone Law Deriving from Molecular Dynamics -
Yi Liao, Xiangguo Zeng, Jun Chen |
732 |
| Finite Element Simulation of Interfacial Fracture between Fe3C and α-Fe Based on Cohesive Zone Law Deriving from Molecular Dynamics -
Taolong Xu, Xiangguo Zeng, Anlin Yao |
742 |
| Tunable Negative Poisson’s Ratio of 3D Spanned-Fullerene Nanotube Nanotruss -
Jianyang Wu, Jianying He, Zhiliang Zhang |
753 |
| Influence of Interfacial Mechanical Properties on Elongation of Multilayered Composite Metals -
Tomotsugu Shimokawa |
761 |
| Failure mode transition of Zr-based bulk metallic glass -
Fan Zeng, LanHong Dai |
767 |
| On bifurcation of homogenous deformation in metallic glasses -
Yan Chen, Lanhong Dai |
773 |
| Mesh Dependence of Transverse Cracking in Laminated Stainless Steel with both High Strength and High Ductility -
Xian Guo, Wenjun Zhang, Jian Lu |
782 |
| Hamiltonian analysis applied to the dynamic crack growth and arrest in a Double Cantilever Beam -
Gilles DEBRUYNE, Radhi ABDELMOULA |
787 |
| The concepts and properties of nanoskin materials and components created by ultrasonic nanocrystal surface modification -
Young Shik Pyoun, Qingyuan Wang, Muhammad Kashif Khan |
797 |
| Efficient simulation of crack growth in multiple-crack systems considering internal boundaries and interfaces -
Paul Judt, Andreas Ricoeur |
805 |
| Crack Growth Life Assessment on Turbine Component under Combined Fatigue Loading -
Dianyin Hu, Rongiqao Wang, Huawei Liu |
815 |
| Numerical investigation of the fracture behavior of tungsten at the micro scale -
Christopher Bohnert, Sabine M Weygand, Nicola J. Schmitt |
824 |
| Mechanics Mechanism of Re-fracturing in Inclusion Reservoirs -
Xue Shifeng Xue Shifeng, Chen Xinmin, Han Zhongying |
833 |
| On propagation of interface cracks parallel to free boundaries in relation to delamination of multilayered coatings -
Konstantin B. Ustinov, Robert Goldstein |
840 |
| On the Formation of Regular Crack Networks around a Circular Hole under Uniform Compression -
Ilya Nickolaevich Dashevskiy |
849 |
| Fatigue Crack Growth Modelling in Welded Stiffened Panels under Cyclic Tension -
Željko Božić, Siegfried Schmauder, Marijo Mlikota |
859 |
| Numerical study of the fracture behavior of an electron beam welded steel joint by cohesive zone modeling -
Haoyun Tu, Siegfried Schmauder, Ulrich Weber |
869 |
| Solidification Cracking of IN 718 TIG Welds -
Myriam Brochu, Alexis Chiocca, Rafael Navalon-Cabanes |
878 |
| Mechanical properties of lattice truss structures made of a selective laser melted superalloy -
Håkan Brodin, Jonas Saarimäki |
888 |
| Evaluation of Optimal Condition in Laser Shock Peening Process by AE Method -
Tomoki Takata, Manabu Enoki, Akinori Matsui |
898 |
| Low Frequency Laser Ultrasonics for Evaluation of Internal Cracks in Multi-layered Steels -
Sho Ikeda, Kaita Ito, Shoichi Nambu |
908 |
| Mode I Fatigue Crack Growth Behaviour in a Welded Cruciform Joint under Biaxial Stresses -
Xiang Zhang, Haiying Zhang, Rui Bao |
909 |
| Ultrasonic Spot Welding of Lightweight Alloys -
V.K. Patel, S.D. Bhole, D.L. Chen |
919 |
| Analysis and residual strength prediction for multiple site damage in aircraft structures by using weight function method -
X.R. Wu, W. Xu, H. Wang |
929 |
| Effect of welding defects on plastic behaviour and fatigue lifetime of friction stir welded Al-Cu-Li alloy -
Thomas Le Jolu, Thilo F. Morgeneyer, Anne Denquin |
939 |
| Fibre Bridging and Crack Tip Shielding in Glare: Numerical and Experimental Validation -
Sunil Bhat |
949 |
| Short/Small Crack Model Development for Aircraft Structural Life Assessment -
Min Liao, Guillaume Renaud, Yan Bombardier |
959 |
| Deformations and Damage Evolution of Austenitic Steel AISI304 with Martensite Phase Transformation -
Gang Han, Huang Yuan |
969 |
| The local concept to assess weldment with help of nano-indentation and FEM simulation -
Jie Fang, Huang Yuan |
980 |
| Application of Fluid-Solid Couple on Multidisciplinary Optimization Design for Turbine Blade -
JIA Zhi-gang, WANG Rong-qiao, HU Dian-yin |
989 |
| Application of Fluid-Solid Couple on Multidisciplinary Optimization Design for Turbine Blade |
989 |
| JIA Zhi-gang1,*, WANG Rong-qiao2, HU Dian-yin2, FAN Jiang2, Shen Xiu-li2 |
989 |
| 1 China aviation engine establishment, Beijing, 100028, China |
989 |
| Abstract The multi-field coupled analysis, a higher precision, is an interaction effect among the fluid, the structure strength and the thermal on the turbine design. Considering the coupled effect in the multidisciplinary optimization design (MDO) c... |
989 |
| Keywords fluid-solid closely coupled analysis; multidisciplinary design optimization (MDO); variable complexity method (VCM); collaborative optimization (CO) strategy; turbine design; |
989 |
| 1. Introduction |
989 |
| 2. Turbine Fluid-Solid Coupled Analysis |
990 |
| 2.1. ALE Problem of Fluid-Solid Couple |
990 |
| 2.2. Dynamic Grid Technology and Coupled Step Settings |
990 |
| 2.3. Process of Fluid-Solid Coupled Analysis Based on ALE |
991 |
| 3. MDO technologies |
991 |
| 3.1. Various precise models |
991 |
| 3.2. Periodic Updating Method |
992 |
| 3.3. Two-Point Scale Function |
992 |
| 3.4. Multiple-Precision Optimization Strategy |
993 |
| 4. Coupled Analysis and MDO on the turbine blade |
994 |
| 4.1. Model Parameters |
994 |
| 4.2. Result Analysis of Coupled Calculation on Turbine Blade |
995 |
| 4.3. Optimization Model of Turbine Blade Based on CO Strategy |
996 |
| 4.4. Optimization Results Analysis |
997 |
| Conclusion |
999 |
| References |
1000 |
| Influence of high temperature ageing on the toughness of advanced heat resistant materials -
Mattias Calmunger, Guocai Chai, Sten Johansson |
1001 |
| Experimental Studies of Thermal Aging Effects on the Tensile and Tearing Fracture Behavior of Carbon Black Filled Rubbers -
Xiaoling Hu, Yan Li, Xiu Liu |
1009 |
| A fracture-based model of periodic-arrayed indentation for rock cutting -
Yu Jun Xie, Bo Yang Xiang, Xiao Zhi Hu |
1014 |
| Theoretical Analysis of Effects of Confining Pressure on the Stress Intensity Factors for Cracked Brazilian Disk -
Jigang Xu, Shiming Dong, Zhenlin Wang |
1023 |
| Separation of the Energy Release Rate of Fracture -
Tianmin Guo |
1032 |
| Fracture Analysis of Particulate MEE Materials Using a Domain-Independent Interaction Integral Method -
Hongjun Yu, Linzhi Wu |
1044 |
| Buckling Analysis of a Nanowire Lying on Winkler-Pasternak Elastic Foundation -
Tiankai Zhao, Jun Luo |
1054 |
| Effect of thermally activated energy on dislocation emission from a blunted crack tip -
X. Zeng, Q.H. Fang, Y.W. Liu |
1059 |
| Effect of cooperative grain boundary sliding and migration on emission of dislocations from a crack tip in nanocrystalline materials -
H. Feng, Q.H. Fang, Y.W. Liu |
1068 |
| Flat-tipped Indentation Fracture Mechanics -
Xiaozhi Hu, Yujun Xie |
1080 |
| Free edge coupling effect of piezoelectric cross-ply laminated plates -
Chao Han Chao Han, Zhangjian Wu |
1089 |
| Improvement of crack-tip stress series with Padé approximants -
Gaëtan Hello, Mabrouk Ben-Tahar, Jean-Marc Roelandt |
1099 |
| On Symmetric Crack Formation in Plates under Central Bending -
Ilya Nickolaevich Dashevskiy |
1108 |
| Edge dislocation emission from nanovoid with the effect of neighboring nanovoids and surface stress -
Yingxin Zhao, Qihong Fang, Youwen Liu |
1116 |
| Edge dislocation emission from nanovoid with the effect of neighboring nanovoids and surface stress -
Yingxin Zhao, Qihong Fang, Youwen Liu |
1125 |
| Multi-scale modeling and diffraction-based characterization of elastic behaviour of human enamel -
Tan Sui, Michael A. Sandholzer, Nikolaos Baimpas |
1134 |
| Fracture toughness measurements on bovine enamel by indentation techniques -
J. Rodríguez, M.A. Garrido, L. Ceballos |
1144 |
| Study of the Mechanical Properties of Bones Under Fracture Healing Conditions with Specific Medical Treatments, Using 4 Point Bending Tests and Ultra-Micro Indentation Techniques -
Soraya Diego, Estela Ruiz, José A. Casado |
1153 |
| Determination of the mechanical properties of normal and calcified human mitral chordae tendineae -
José A. Casado, Soraya Diego, Diego Ferreño |
1163 |
| Understanding Backspatter due to Skull Fracture from a Ballistic Projectile -
Raj Das, Justin Fernandez, Alistair Collins |
1173 |
| All-Atom CSAW: An Ab Initio Protein Folding Method -
Weitao Sun |
1183 |
| Technology in Locomotion and Domotic Control for Quadriplegic -
Mauricio Plaza, Oscar Avilés, William Aperador |
1189 |
| The Crack Growth Behavior in electrolyte membrane under Mechanical-electrochemical Loading -
Yun J Chen, Yi Sun, Yi Z Liu |
1198 |
| Mechanisms of failure in porcelain-veneered sintered zirconia restorations -
Tan Sui, Kalin Dragnevski, Tee K. Neo |
1206 |
| Cracking simulation of ceramic materials under thermal shock by a non-local fracture model -
Li Jia, Song Fan, Jiang Chiping |
1215 |
| Mechanical Characterization of Sisal Fiber Reinforced Cement Mortar -
Roberto Fujiyama, Fathi Darwish, Marcos Pereira |
1225 |
| Analysis of stress singularity field near the cross point of inclusion and free surface by 3D element free Galerkin method -
Yasuyuki Tsukada, Takahiko Kurahashi, Hideo Koguchi |
1232 |
| Finite element analysis of erosive wear for offshore structure -
Z.G. Liu, S. Wan, V.B. Nguyen |
1239 |
| Computational Method for Crack Layer Model -
Haiying Zhang Haiying Zhang, Alexander Chudnovsky |
1247 |
| Modelling Damage in Nuclear Graphite -
Thorsten Becker, James Marrow |
1257 |
| A Stabilized Sequential Coupling Algorithm for Hydro-mechanical Systems using Reproducing Kernel Particle Method -
Yongning XIE, Gang WANG |
1266 |
| Random elasto-plastic lattice modeling of damage in fibrous materials -
Keqiang Hu, Zengtao Chen, K. C. Li |
1276 |
| Cohesive Zone Analysis of Crack Propagation on a Hierarchical Structured Interface -
Xiaoru Wang, Akihiro Nakatani |
1286 |
| Modeling of cracked structures containing voids subjected to fatigue and dynamic loads using XFEM -
Mohamed Riad KIRED, Brahim Elkhalil HACHI, Mohamed GUESMI |
1296 |
| Mixed mode computation of the dynamic stress intensity factor for cracked 2D structures with inclusion using XFEM -
Alaa Eddine HOUA, Brahim Elkhalil HACHI, Mohamed GUESMI |
1301 |
| Size Effect Analysis of Recycled Concrete Fracture based on Micromechanics Using the Base Force Element Method -
Yijiang Peng, Nana Dang, Lijuan Zhang |
1306 |
| Identification of fracture process under moisture variation in wood materials -
Frédéric Dubois, Rostand Moutou Pitti, Eric Fournely |
1316 |
| T-stress evaluation in nonhomogeneous materials under thermal loading by means of interaction energy integral method -
Fengnan Guo, Licheng Guo, Hongjun Yu |
1326 |
| Torsional properties of bamboo-like structured Cu nanowires -
Haifei Zhan, Yuantong Gu |
1332 |
| Computational prediction of fracture toughness of polycrystalline metals -
Yan Li, David L. McDowell, Min Zhou |
1341 |
| Residual stress effects on the propagation of fatigue cracks in the weld of a CA6NM stainless steel -
Alexandre Trudel, Myriam Brochu, Martin Lévesque |
1349 |
| Cutting zone temperature and specific cutting energy measurements and evaluation in machining metals -
Y. Yifrach, U. Ben-Hanan |
1359 |
| Modeling of Damage Evolution in Particulate Reinforced Composites with VCFEM -
Ran Guo, Wenyan Zhang, Benning Qu |
1369 |
| A New Interface Element for Shell Structures Delamination Analysis -
Biao Li, Yazhi Li, Jie Su |
1377 |
| Advanced remeshing techniques for complex 3D crack propagation -
Vincent Chiaruttini, Vincent Riolo, Frederic Feyel |
1383 |
| Time-Domain BEM for Dynamic Crack Problems in Thin Piezoelectric Structures -
Hongjun Zhong, Jun Lei, Chuanzeng Zhang |
1392 |
| Transient Dynamic Crack Analysis in Decagonal Quasicrystal -
Vladimir Sladek, Jan Sladek, Slavomir Krahulec |
1401 |
| Finite Deformation Modeling of Crystalline Defects in Hyper-elastic Material -
Akihiro Nakatani, Mitsuhiro Akita |
1411 |
| Investigation on 3D fatigue crack propagation in surface-cracked specimens -
X. Li, H. Yuan, J.Y. Sun |
1418 |
| Wedge Splitting Test on Fracture Behaviour of Fiber Reinforced and Regular High Performance Concretes -
Kamil Hodicky, Thomas Hulin, Jacob W. Schmidt |
1426 |
| Instability and failure of particulate materials caused by rolling of non-spherical particles -
Elena Pasternak, Arcady V. Dyskin |
1436 |
| Mechanism of in-plane fracture growth in particulate materials based on relative particle rotations -
Arcady V. Dyskin, Elena Pasternak |
1446 |
| Simulation of Damage and Crack Propagation in Three-Point Bending Asphalt Concrete Beam -
Guowei Zeng, Xinhua Yang, Fan Bai |
1456 |
| A New LEFM Based Description of Concrete Fracture and Size Effects -
Kim Wallin |
1465 |
| Effect of Characteristic Specifications on Fracture Toughness of Asphalt Concrete Materials -
Hamid Behbahani, MohammadReza. M. Aliha, Hassan Fazaeli |
1475 |
| A constitutive approach to fracture simulation based on augmented virtual internal bond method -
Zhennan Zhang, Shaofeng Yao |
1484 |
| Investigation on the Failure Mechanisms in Sandstones under Uniaxial Compression by Digital Image Correlation -
Ganyun Huang, Hao Zhang, Haipeng Song |
1491 |
| Rock fracture toughness testing using SCB specimen -
M. R. Ayatollahi, M. J. Alborzi |
1497 |
| Modeling Fracture Processes in Numerical Concrete -
Zhiwei Qian, Erik Schlangen, Guang Ye |
1504 |
| Stability and fracture analysis of arch dam based on deformation reinforcement theory -
Yuanwei Pan, Yaoru Liu, Qiang Yang |
1510 |
| Acoustic emission detection in concrete specimens: experimental analysis and simulations by a lattice model -
I. Iturrioz, G. Lacidogna, A. Carpinteri |
1517 |
| Particle simulation of AE statistics and fracture in concrete TPB test -
Alberto Carpinteri, Giuseppe Lacidogna, Stefano Invernizzi |
1531 |
| Numerical Modeling on the Stress-Strain Response and Fracture of Modeled Recycled Aggregate Concrete -
Wengui Li, Jianzhuang Xiao, David J. Corr |
1540 |
| Determination of Residual Fracture Toughness of Post-fire Concrete Using Analytical and Weight Function Method -
Kequan YU, Zhoudao LU, jiangtao YU |
1551 |
| Initiation and Propagation Behavior of a Fatigue Crack of Maraging Steel in High Humidity -
Qiang Chen, Takanori Nagano, Yuzo Nakamura |
1563 |
| Crystallographic texture helps reduce HIC cracking in pipeline steels -
José M. Hallen, Victoria Venegas, Francisco Caleyo |
1572 |
| Stress Corrosion Cracking Behavior of Wrought Magnesium Alloy AZ31 and AZ61 under Controlled Cathodic Potentials -
Toshifumi Kakiuchi, Yoshihiko Uematsu, Masaki Nakajima |
1579 |
| The influence of sea water corrosion on the resistance cracking performance of carbon steel -
Wang Limin, Han Daoping, Zhang Donghuan |
1587 |
| Cohesive Zone Model for Intergranular Slow Crack Growth in Zirconia and Ceramic: Influence of the water concentration and Microstructure -
Bassem El Zoghbi, Rafael Estevez, Christian Olagnon |
1592 |
| Performance Deregulation Rule of Aircraft Fatigue Critical Components in Consideration of Calendar Environment -
Chao Gao, Yuting He, Haiwei Zhang |
1602 |
| Developing New Innovative Descaling and Corrosion Inhibiting Solutions to Protect Steel Equipment in the Oil and Gas Industry -
Abdulghani A. Jaralla, Muhannad M. Al-Darbi |
1610 |
| Crack initiation: stress-corrosion crack in X-52 pipeline steel in near-neutral pH environment -
Mimoun Elboujdaini, Bingyan Fang, Rrg Eadie |
1619 |
| Recent developments in brittle and quasi-brittle failure assessment of graphite by means of SED approach -
Filippo Berto, Paolo Lazzarin, M.R. Ayatollahi |
1632 |
| Stress state dependent failure loci of a talc-filled polypropylene material under static loading and dynamic loading -
Shaoting Lin, Yong Xia, Chin-Hsu Lin |
1640 |
| Molecular Dynamics Simulation of Fracture of Graphene -
M. A. N. Dewapriya, R. K. N. D. Rajapakse, A. Srikantha Phani |
1656 |
| Experimental study of heat dissipation process into fatigue crack tip in titanium alloys. -
M.V. Bannikov, A.I. Terekhina, A.Y. Fedorova |
1662 |
| CTOD fracture toughness assessment method of High-strength steel based on BS7910 -
Ziyu Xia, Zhangmu Miao, Tao Ma |
1670 |
| Crack Nucleation in Phase Field Fracture Models -
Charlotte Kuhn, Ralf Müller |
1680 |
| Design based on ductile-brittle transition temperature for API 5L X65 steel used for dense CO2 transport -
G Pluvinage, J Capelle, Z Azari |
1690 |
| Fracture toughness criteria of small-size specimens with ultrafine-grained structure -
Yevgeny Deryugin |
1700 |
| A coupled stress and energy model for mixed-mode cracking of adhesive joints -
Philipp Weißgraeber, Wilfried Becker |
1708 |
| Plastic factor of front face compact tension specimens -
KAIKAI SHI, LIXUN CAI, CHEN BAO |
1716 |
| Continuous vs. Discontinuous Crack Extension: Characterization of Ductile Tearing in Thin Plates -
Volodymyr P. Naumenko |
1723 |
| Influence of the residual stresses on the crack deflection in ceramic laminates -
Oldrich Sevecek, Michal Kotou, Tomas Profant |
1733 |
| Application of a novel finite element method to design of splices in a fiber metal subjected to coupled thermo-mechanical loading -
XueCheng Ping, MengCheng Chen, BingBing Zheng |
1743 |
| Examination on a Criterion for a Debonding Fracture of Single Lap Joints from the Intensity of Singular Stress Field -
Tatsujiro Miyazaki, Nao-Aki Noda, Rong Li |
1753 |
| Fatigue delamination growth of composite laminates with fiber bridging: Theory and simulation -
Lei Peng, Jifeng Xu |
1760 |
| Microstructure and properties of welding joint of 8%Ni high strength steel -
R. Cao, J. H. Chen, Y. Peng |
1770 |
| A fracture-mechanics-based non-local damage model for crack prediction in brittle materials -
Zhang Xiao-Bing, Li Jia |
1780 |
| Ferritic-pearlitic ductile cast irons: is ΔK a useful parameter? -
Francesco Iacoviello, Vittorio Di Cocco, Alessandra Rossi, Mauro Cavallini |
1790 |
| Modeling of Strain Localization and Failure in Vanadium under Quasistatic Loading -
Anastasia Kostina, Yuriy Bayandin, Oleg Plekhov |
1799 |
| Electrification of Glass by Fracture -
Li Xie, Dewen Sun, Jun Zhou |
1809 |
| Influence of Microstructure on Fatigue Crack Propagation and Fracture Toughness of Large Ti-6Al-4V Cast Structure -
Xin Feng, Anqi Wang, Yingjie Ma |
1816 |
| A New Damage Identification Strategy for SHM based on FBGs and Bayesian Model Updating Method -
Yanhui Zhang, Wenyu Yang |
1823 |
| Сriticality of Damage-Failure Transitions under Dynamic and Fatigue Loading -
Oleg Naimark |
1833 |
| Dynamic fracture of metals in wide range of strain rates -
Alexander E. Mayer |
1843 |
| An Equivalent Strain Gradient Theory for Evolvement of Damage in void Material -
Hong Zuo, Fangwen Wang, Teng Hou |
1852 |
| Singular Thermo-Elastic Stress Analysis of An Irregular Shaped Inclusion -
MengCheng Chen, XueCheng Pin |
1862 |
| A Mechanism-Based Approach for Predicting Ductile Fracture of Metallic Alloys -
Xiaosheng Gao |
1870 |
| Effect of pre-existing microcrack on the cyclic displacement instability in thermal barrier coating systems -
Luochuan Su, Weixu Zhang, T.J. Wang |
1880 |