13th International Conference on Fracture June 16–21, 2013, Beijing, China -10- [3] Worswick, M.J., Pilkey A.K., Thomson C.I.A., Lloyd D.J. and Burger G. (1998), Percolation damage predictions based on measured second phase particle distributions, Micro. Sci., 507-514 [4] Worswick, M.J., Chen Z.T., Pilkey A.K., Lloyd D., Court S. (2001). Damage characterization and damage percolation modeling in aluminum alloy sheet. Acta Mater. 49, 2791-2803. [5] Chen, Z.T. (2004). The role of heterogeneous particle distribution in the prediction of ductile fracture. Ph.D. Thesis, University of Waterloo, Canada. [6] Hallquist, J.O. (2006). LS-DYNA Theory Manual. Livermore Software Technology Corp. [7] Tvergaard, V. (1981). Influence of voids on shear band instabilities under plane strain conditions. Int. J. Frac. 17, 389-407. [8] Ragab, A.R. (2004). Application of an extended void growth model with strain hardening and void shape evolution to ductile fracture under axisymmetric tension. Eng. Fract. Mech. 71, 1515-1534. [9] Pardoen, T., Hutchinson, J. (2000). An extended model for void growth and coalescence. J. Mech. Phys. Solids 48, 2567-2512. [10] Tandon, G.P. and Weng, G.J.: Average stress in the matrix and effective moduli of randomly Oriented composites. Compos. Sci. Tech. 27, 111-132 (1986) [11] Butcher. C., Chen, Z.T. and Worswick, M.J. (2013). Integration of a particle-based homogenization theory into a general damage-based constitutive model to improve the modelling of void nucleation to coalescence. Acta Mech. 224, 139-156. [12] Moulin N., Jeulin D., Klöcker H., (2009). Stress concentrations in non-convex elastic particles embedded in a ductile matrix. Int. J. Eng. Sci. 47, 170–191 [13] Thomason, P. (1990). Ductile fracture of metals. Pergamon Press Inc., Oxford. [14] Orlov, O. (2006). A three-dimensional damage percolation model. Ph.D. Thesis, University of Waterloo, Waterloo, Ontario, Canada [15] Butcher, C., Chen, Z.T. (2011). Characterizing void nucleation in a damage-based constitutive model using notched tensile sheet specimens. Theor. Appl. Frac. Mech., 55, 140-147. [16] Rathod, M.J., Kutsuna, M. (2004). Joining of Aluminum Alloy 5052 and Low-Carbon Steel by Laser Roll Welding. Welding Research, January, 16-26. [17] Smerd, R., Winkler, S., Salisbury, C., Worswick, M., Lloyd, D. and Finn, M. (2005). High strain rate tensile testing of automotive aluminum alloy sheet. Int. J. Impact. Eng. 32 541-560.
RkJQdWJsaXNoZXIy MjM0NDE=