13th International Conference on Fracture June 16–21, 2013, Beijing, China -9- International Symposium on Superalloys, (2008) 433-442. [5] R.V. Miner, T.P. Gabb, J. Gayda, Orientation and temperature dependence of some mechanical properties of the single-crystal nickel-base superalloy René N4 III - Tension-compression anisotropy. Metallurgical Transactions A, 17 (1986) 507-512. [6] S.S. Ezz, D.P. Pope, V. Paidar, The tension/compression flow stress asymmetry in Ni3(Al,Nb) Single crystals. Acta Metallurgica, 30 (1982) 921-926. [7] D. Leidermark, J.J. Moverare, S. Johansson, K. Simonsson, S. Sjöström, Tension/compression asymmetry of a single-crystal superalloy in virgin and degraded condition. Acta Materialia, 58 (2010) 4986-4997. [8] M. Segersäll, J.J. Moverare, K. Simonsson, S. Johansson, Deformation and damage mechanisms during thermomechanical fatigue of a single-crystal superalloy in the 〈001〉 and 〈011〉 directions. Proceedings of the International Symposium on Superalloys, (2012) 215-223. [9] J.J. Moverare, S. Johansson, R.C. Reed, Deformation and damage mechanisms during thermal–mechanical fatigue of a single-crystal superalloy. Acta Materialia, 57 (2009) 2266-2276. [10]J.X. Zhang, H. Harada, Y. Ro, Y. Koizumi, T. Kobayashi, Thermomechanical fatigue mechanism in a modern single crystal nickel base superalloy TMS-82. Acta Materialia, 56 (2008) 2975-2987. [11]M. Dupeux, J. Henriet, M. Ignat, Tensile stress relaxation behaviour of Ni-based superalloy single crystals between 973 and 1273 K. Acta Metallurgica, 35 (1987) 2203-2212. [12]H. Mughrabi, Microstructural aspects of high temperature deformation of monocrystalline nickel base superalloys: Some open problems. Materials Science and Technology, 25 (2009) 191-204. [13]T.M. Pollock, A.S. Argon, Directional coarsening in nickel-base single crystals with high volume fractions of coherent precipitates, Acta Metallurgica et Materialia. 42 (1994) 1859-1874. [14]U. Tetzlaff, H. Mughrabi, Enhancement of the High-Temperature Tensile Creep Strength of Monocrystalline Nickel-Base Superalloys by Pre-rafting in Compression. Proceedings of the International Symposium on Superalloys, (2000) 273-282. [15]H. Mughrabi, U. Tetzlaff, Microstructure and high-temperature strength of monocrystalline nickel-base superalloys. Advanced Engineering Materials, 2 (2000) 319-326. [16]M. Ott, H. Mughrabi, Dependence of the high-temperature low-cycle fatigue behaviour of the monocrystalline nickel-base superalloys CMSX-4 and CMSX-6 on the γ/γ′-morphology. Materials Science and Engineering: A, 272 (1999) 24-30. [17]R.V. Miner, R.C. Voigt, J. Gayda, T.P. Gabb, Orientation and temperature dependence of some mechanical properties of the single-crystal superalloy René N4 Part I: Tensile behavior. Metallurgical Transactions A, 17 (1986) 491-496. [18]T.S. Rong, Serrated yielding in the B2-ordered Nb–15Al–20V alloy. Intermetallics, 11 (2003) 151-155. [19]X. Wu, J.H. Zhang, J.L. Liu, T. Jin, Y.B. Xu, Z.Q. Hu, Plastic deformation inhomogeneity in a single crystal nickel-base superalloy. Materials Science and Engineering: A, 325 (2002) 478-483. [20]E.F. Westbrooke, L.E. Forero, F. Ebrahimi, Slip analysis in a Ni-base superalloy. Acta
RkJQdWJsaXNoZXIy MjM0NDE=