13th International Conference on Fracture June 16–21, 2013, Beijing, China 9 [3] Kayser Y, Marie S, Poussard C, Delaval C. Leak Before Break procedure: Recent modification of RCC-MR A16 appendix and proposed improvements. Int J Pres Ves Pip 2008;85:681-93. [4] Wen JF, Tu ST, Gong JM, Sun W. Creep fracture mechanics parameters for internal axial surface cracks in pressurized cylinders and creep crack growth analysis. Int J Pres Ves Pip 2011;88:452-64. [5] Lemaitre J, Desmorat R. Engineering damage mechanics: ductile, creep, fatigue and brittle failures. Berlin: Springer-Verlag; 2005. [6] Oh CS, Kim NH, Kim YJ, Davies C, Nikbin K, Dean D. Creep failure simulations of 316H at 550 degree C: Part I: method and validation. Engng Fract Mech 2011;78:2966-77. [7] Oh CS, Kim NH, Min SH, Kim YJ. Finite element damage analysis for predictions of creep crack growth. Proceedings of the ASME 2010 Pressure Vessels & Piping Division / K-PVP Conference. Washington, USA. 2010. [8] Hyde TH, Saber M, Sun W. Testing and modelling of creep crack growth in compact tension specimens from a P91 weld at 650 degree C. Engng Fract Mech 2010;77:2946-57. [9] Hyde CJ, Hyde TH, Sun W, Becker AA. Damage mechanics based predictions of creep crack growth in 316 stainless steel. Engng Fract Mech 2010;77:2385-402. [10] Yatomi M, Tabuchi M. Issues relating to numerical modelling of creep crack growth. Engng Fract Mech 2010;77:3043-52. [11] Yatomi M, Davies CM, Nikbin KM. Creep crack growth simulations in 316H stainless steel. Engng Fract Mech 2008;75:5140-50. [12] Yatomi M, O'Dowd NP, Nikbin KM, Webster GA. Theoretical and numerical modelling of creep crack growth in a carbon-manganese steel. Engng Fract Mech 2006;73:1158-75. [13] Yatomi M, Bettinson AD, O'Dowd NP, Nikbin KM. Modelling of damage development and failure in notched-bar multiaxial creep tests. Fatigue Fract Engng Mater Struct 2004;27:283-95. [14] Yatomi M, Nikbin KM, O'Dowd NP. Creep crack growth prediction using a damage based approach. Int J Pres Ves Pip 2003;80:573-83. [15] Hyde TH. Creep crack growth in 316 stainless steel at 600 degree C. High Temp Technol 1988;6:51-61. [16] Rabotnov YN. Creep problems in structural members. Amsterdam: North-Holland; 1969. [17] Kachanov LM. Rupture time under creep conditions. Int J Fracture 1999;97:11-8. [18] Liu Y, Murakami S. Damage localization of conventional creep damage models and proposition of a new model for creep damage analysis. JSME Int J Ser A 1998;41:57-65. [19] Murakami S, Liu Y. Mesh-dependence in local approach to creep fracture. Int J Damage Mech 1995;4:230. [20] Murakami S, Liu Y, Mizuno M. Computational methods for creep fracture analysis by damage mechanics. Comput Meth Appl Mech Engng 2000;183:15-33. [21] Wen JF, Tu ST, Gao XL, Reddy JN. Simulations of creep crack growth in 316 stainless steel using a novel creep-damage model. Engng Fract Mech 2013; doi: http://dx.doi.org/10.1016/j.engfracmech.2012.12.014. [22] Wen JF, Tu ST, Gao XL, Reddy JN. A new model for creep damage analysis and its application to creep crack growth simulations. 9th International Conference on Creep and Fatigue at Elevated Temperatures. London, UK. 2012.
RkJQdWJsaXNoZXIy MjM0NDE=