13th International Conference on Fracture June 16–21, 2013, Beijing, China -10- [11] BSI. Advanced technical ceramics: test methods for determination of fracture toughness of monolithic ceramics. Part 5: single-edge v-notch beam !(SEVNB) method. DD CEN 14425-5, British Standards Institution; 2004. [12] D. Carolan, P. Alveen, A. Ivanković, N. Murphy, Effect of notch root radius on fracture toughness of polycrystalline cubic boron nitride. Eng. Frac. Mech. 78 (2011) 2885-2895. [13] A. Ivanković and J.G. Williams, The Finite Volume Analysis of Linear Elastic Dynamic Fracture Problems, In Dynamic Fracture Mechanics, Chapter 3, Eds. M. H. Aliabadi, (Computational Mechanics Publications, Southampton), 1995, 101-135. [14] H. Weller, G. Tabor, H. Jasak, C. Fureby. A tensorial approach to CFD using object oriented techniques. Computers in Physics, 12 (1998) 620– 631 . [15] I. Villa, J. loya, J. Fernandez-Saez, General expressions for the stress intensity factor of a one-point bend beam, Eng. Frac. Mech., 74.3 (2007) 373-385. [16] J.F. Kalthoff, S. Winkler, W. Bohme and W. Klemm, Determination of the dynamic fracture toughness K1d in impact by means of response curve. Int. J. Frac. 12 (1980), 277-298. [17] J.F. Kalthoff, S. Winkler and W. Bohme, A novel procedure for measuring the impact fracture toughness K1d with precracked charpy specimen, Journal de Physique 46 (1985), 363-373. [18] A. Rager, J.G. Williams and A. Ivanković, Numerical Analysis of the three point bend impact tests for polymers, Int. J. Frac. 135 (2005), 201-217. [19] A. Ivanković, J.G. Williams, A local modulus analysis of rapid crack propagation in polymers. Int. J. Frac. 64(4) (1993), 251-268. [20] P. Cardiff, A Karac and A. Ivanković. Development of a finite volume contact solver based on the penalty method. Computational Materials Science (2012). [21] D. Carolan, A. Ivanković, N. Murphy, A combined experimental-numerical investigation of fracture of Polycrystalline Cubic Boron Nitride. In Press, Accepted Manuscript, Eng. Fract. Mech. http://dx.doi.org/10.1016/j.engfracmech.2012.09.008.
RkJQdWJsaXNoZXIy MjM0NDE=