13th International Conference on Fracture June 16–21, 2013, Beijing, China -8- References [1] Specification for line pipe steel API5L, API, 2007. [2] D. Porter, A. Laukkanen, P. Nevasmaa, K. Rahka, K. Wallin, Performance of TMCP steel with respect to mechanical properties after cold forming and post-forming heat treatment. Int J Press Vessels Pip, 22 (2004) 867–877. [3] R. K. Ray, J. J. Jonas, Transformation textures in steels. Int Mater Rev, 35 (1990) 1-36. [4] F. J. Humphreys, M. Hatherly, Recrystallization and related annealing phenomena. Amsterdam, Elsevier, 2004. [5] G.J. Baczynski, J.J. Jonas, L. E. Collins, The influence of rolling practice on notch toughness and texture development in high-strength linepipe. Metall Mater Trans A, 30 (1999) 3045 – 3054. [6] P.K.C. Venkatsurya, Z. Jia, R.D.K. Misra, M.D.Mulholland, M. Manohar, J.E. Hartmann. Understanding mechanical property anisotropy in high strength niobium-microalloyed linepipe steels. Mater Sci Eng A, 556 (2012) 194-210. [7] R.D.K. Misra, H. Nathani, F. Siciliano, Effect of texture and microstructure on resistance to cracking of high-strength hot-rolled nb-ti microalloyed steels. Metall Mater Trans A, 35 (2004) 3024-3029. [8] D.L. Bourell, Cleavage delamination in impact tested warm-rolled. Metall Trans A, 14 (1983) 1983-2487. [9] M.S. Joo, W. Suh, J.H. Bae, H.K.D.H. Bhadeshia, Role of delamination and crystallography on anisotropy of Charpy toughness in API-X80 steel. Mater Sci Eng A, 546 (2012) 314-322. [10] T. Inoue, F. Yin, Y. Kimura, K. Tsuzaki, S. Ochiai, Delamination Effect on impact properties of ultrafine-grained low-carbon steel processed by warm caliber rolling. Metall Mater Trans A, 41 (2010) 341-355. [11] W. Yan, W. Sha, L. Zhu, W. Wang, Y. Y. Shan, K. Yang, Delamination fracture related to tempering in a high-strength low-alloy steel. Metall Mater Trans A, 41 (2010) 159-171. [12] T. Otárola, S. Hollner, B. Bonnefois, M. Anglada, L. Coudreuse, A. Embrittlement of a superduplex stainless steel in the range of 550–700 °C, Eng Fail Anal, 12 (2005) 930–941. [13] T. Tanaka, Controlled rolling of steel plate and strip. Int Mater Rev, 4 (1981) 185-212. [14] C. Grobler, G. T. Van Rooyen, The mechanisms by which splitting occurs along sheared edges and in charpy specimens of a 12% chromium steel, Can Metall Q, 27 (1988) 49- 58. [15] B.L. Bramfitt, A.R. Marder, A study of the delamination behavior of a very low-carbon steel. Metall Mater Trans A, 8 (1977) 1263-1273. [16] American Society for Test and Materials, Standard test method for tension test of metallic materials [metric], ASTM E8M, Philadelphia, 2004. [17] American Society for Test and Materials. Standard test method for measurement of fracture toughness, ASTM E1820, Philadelphia, 2005. [18] S. Cravero, C. Ruggieri, Estimation procedure of J-resistance curves for SE(T) specimens using unloading compliance. Eng Fract. Mech, 74 (2007) 2735-2757. [19] E. Hippert Jr, Investigação experimental do comportamento dúctil de aços API-X70 e aplicação de curvas de resistência J-Δa para previsão de colapso em dutos. M. Sc. thesis, Polytechnic School of São Paulo, Univesity of São Paulo, 2007. [20] W. Guo, H. Dong, M. Lu, X. Zhao, The coupled effects of thickness and delamination on
RkJQdWJsaXNoZXIy MjM0NDE=