13th International Conference on Fracture June 16–21, 2013, Beijing, China -10- Acknowledgements This work has been carried out in the donated laboratory by the AIR LIQUIDE, France and AIR LIQUIDE JAPAN. A part of this work has been supported by the NEDO project “Fundamental Research Project on Advanced Hydrogen Science” (2006-2012). This work was also supported by the World Premier International Research Center Initiative (WPI), MEXT, Japan. The International Institute for Carbon-Neutral Energy Research (WPI-I2CNER) is supported by the World Premier International Research Center Initiative (WPI), MEXT, Japan. References [1] Y. Kondo, M. Bodai, Study on fretting fatigue crack initiation mechanism based on local stress at contact edge. Trans. JSME, A63-635 (1997) 1567-1572. [2] M. Kubota, T. Nishimura, Y. Kondo, Effect of hydrogen concentration on fretting fatigue strength. Journal of solid mechanics and materials science, 4-6 (2010) 1-14. [3] M. Kubota. et al., Mechanism of reduction of fretting fatigue limit caused by hydrogen gas in SUS304 austenitic stainless steel, Tribology international, 44 (2011) 1495-1502. [4] NASA, Safety standard for hydrogen and hydrogen systems, NSS 1740.16 (1997). [5] Japan Automobile Research Institute, JARI S 001 (2004). [6] Y. Murakami, T. Kanezaki, Y. Mine, S. Matsuoka, Hydrogen embrittlement mechanism in fatigue of austenitic stainless steels, Metallurgical and materials transactions, 39A (2008) 1327-1339. [7] A. Iwabuchi, T. Kayaba, K. Kato, Effect of atmospheric pressure of friction and wear of 0.45%C steel in fretting wear. Wear, 91(1983) 289-305. [8] B. Bethune, R. B. Waterhouse, Adhesion of metal surfaces under fretting conditions. I. Like metals in contact. Wear, 12 (1968) 289-296. [9] S. Faanes, U. S. Fernando, Life prediction in fretting fatigue, in: R. B. Waterhouse, T. C. Lindley (Eds.), Fretting fatigue, ESIS publication 18, Mechanical Engineering Publications Limited, London, 1994, pp. 149-159. [10] K. Nishioka, K. Hirakawa, Fundametal investigations of fretting fatigue (Part 5, The effect of relative slip amplitude), Bulletin JSME, 12-52 (1969) 692-697. [11] Endo K, Goto H, Initiation and propagation of fretting fatigue cracks. Wear 1976; 38: 311-24. [12] K. Nishioka, K. Hirakawa, “Fundamental investigation of fretting fatigue – Part 3. Some phenomena and mechanisms of surface cracks”, Bulletin JSME, 12-51 (1969) 397-407. [13] R. Komoda, M. Kubota, Y. Kondo, J. Furtado, Fundamental mechanisms causing reduction in fretting fatigue strength by hydrogen, Trans. JSME, Reviewing. [14] K. A. Nibur, B. P. Somerday, D. K. Balch, C. San Marchi, The role of localized deformation in hydrogen-assisted crack propagation in 21Cr-6Ni-9Mn stainless steel. Acta Materialia, 57 (2009) 3795-3809. [15] K. Horikawa, N. Ando, H. Kobayashi, W. Urushihara, Visualization of hydrogen gas evolution during deformation and fracture in SCM440 steel with different tempering conditions. Materials Science and Engineering, 534A (2012) 495-503. [16] M. Kubota, et al., Effects of multiple overloads and hydrogen on high-cycle fatigue strength of notched specimen of austenitic stainless steels. Trans. JSME, 77A-782 (2011) 1747-1759. [17] H. G. Nelson, J. E. Stein, Gas-phase hydrogen permeation through alpha iron, 4130 steel and 304stainless steel from less than 100C to near 600C. NASA TN D-7265 (1973). [18] T. Kanezaki, C. Narazaki, Y. Mine, S. Matsuoka, Y. Murakami, Effects of hydrogen on fatigue crack growth behavior of austenitic stainless steels. Hydrogen energy, 33 (2008) 2604-2619. [19] K. Mizobe, Y. Shiraishi, M. Kubota, Y. Kondo, Effect of hydrogen on fretting fatigue strength of SUS304 and SUS316l austenitic stainless steels. Proc. the JSME/ASME 2011 International Conference on Materials and Processing ICM&P2011, 2011, Corvallis, OR, USA. [20] M. Kubota, Y. Adachi, Y. Shiraishi, R. Komoda, J. Furtado, Y. Kondo, Effect of hydrogen and addition of oxygen on fretting fatigue properties, Proceedings of 2012 Hydrogen conference, 2012, Moran, WY, USA.
RkJQdWJsaXNoZXIy MjM0NDE=