13th International Conference on Fracture June 16–21, 2013, Beijing, China -10- Acknowledgements G. M. Castelluccio and D.L. McDowell are deeply grateful for the support provided by Integrated Systems Solutions, Inc. (Technical Monitor: Dr. Nam Phan, NAVAIR). References [1] G. M. Castelluccio, „A study on the influence of microstructure on small fatigue cracks‟, PhD Thesis, Georgia Institute of Technology, Atlanta, GA, USA, 2012. [2] G. Castelluccio, D. L. McDowell, „Fatigue Life Prediction of Microstructures‟. In Proceedings of the ASME International Mechanical Engineering Congress and Exposition. Houston, Texas, USA: ASME, 2012. [3] B. Lin, L. G. Zhao, J. Tong, and H.-J. Christ, „Crystal plasticity modeling of cyclic deformation for a polycrystalline nickel-based superalloy at high temperature‟, Mater. Sci. Eng., A, 527(15), 3581–3587, 2010. [4] ABAQUS, FEM software V6.9, Simulia Corp., Providence, RI, USA. Providence, RI, USA: Simulia, Inc., 2009. [5] A. Fatemi, D. F. Socie. A critical plane approach to multiaxial fatigue damage including out-of-phase loading. Fatigue Fract. Eng. Mater. Struct., 11(3), 149--165, 1988. [6] M. Shenoy, J. Zhang, and D. L. McDowell, “Estimating fatigue sensitivity to polycrystalline Ni-base superalloy microstructures using a computational approach,” Fatigue Fract. Eng. Mater. Struct., (10) , 889-904, 2007. [7] C. Przybyla, R. Prasannavenkatesan, N. Salajegheh, and D. L. McDowell, „Microstructure- sensitive modeling of high cycle fatigue‟, Int. J. Fatigue, 32 (3), 512–525, 2010. [8] S. C. Reddy and A. Fatemi, „Small Crack Growth in Multiaxial Fatigue‟, in Advances in Fatigue Lifetime Predictive Techniques, ASTM, 1992, 276–298. [9] G. M. Castelluccio and D. L. McDowell, “Assessment of Small Fatigue Crack Growth Driving Forces in Single Crystals with and without Slip Bands, Int. J. Fracture, 176(1), 49-64 2012. [10] P. D. Hobson, “The formulation of a crack-growth Equation for short cracks,” Fat. Eng. Mater. Struct., 5 ( 4) , 323-327, 1982. [11] P. D. Hobson, M. W. Brown, and E. R. de los Rios, “Two Phases of Short Crack Growth in a Medium Carbon Steel,” in The behaviour of short fatigue cracks (London: Mechanical Engineering Publications, 1986), 441-459. [12] K. Miller, “The three thresholds for fatigue crack propagation,” in Fatigue and Fracture Mechanics: 27th volume, ASTM STP 1296 (1997), 267-286. [13] W. D. Musinski, D. L. McDowell, Microstructure-sensitive probabilistic modeling of HCF crack initiation and early crack growth in Ni-base superalloy IN100 notched components. Int. J. Fatigue, 37, 41–53, 2012. [14] F. A. Kandil, M. W. Brown, and K. J. Miller. ”Biaxial Low Cycle Fatigue Failure of 316 Stainless Steel at Elevated Temperatures,” In Metal Society Book 280, 203–210. Varese, Italy: Metal Society of London, 1982. [15] H. A. Suhartono , K. Pötter, A. Schram, and H. Zenner. ”Modeling of Short Crack Growth Under Biaxial Fatigue: Comparison Between Simulation and Experiment,” 323–339. ASTM STP 1387, 2000.
RkJQdWJsaXNoZXIy MjM0NDE=