13th International Conference on Fracture June 16–21, 2013, Beijing, China -11- from ductile fracture to brittle facture behavior with decreasing thickness. It is suggested that with continuing decreasing specimen thickness, m could increase until a constant maximum value is achieved and brittle fatigue fracture behavior dominates the crack growth process. Acknowledgements Dr. L. Liu was supported by the National Natural Science Foundation of China under Grant No. 11002020 and the Program for New Century Excellent Talents at Chinese Universities. Professor John W. Holmes was supported by the National Thousand Talent Plan of China and by the International Center for Clean Energy Systems and Materials at Beihang University. References [1] M. Klein, A. Hadrboletz, B. Weiss, and G. Khatibi, The ‘size effect’ on the stress–strain, fatigue and fracture properties of thin metallic foils. Material Science and Engineering A, 319–321, (2001) 924-928. [2] G.P. Zhang, K.H. Sun, B. Zhang, J. Gong, C. Sun C and Z.G. Wang, Tensile and fatigue strength of ultrathin copper films. Material Science and Engineering A, 483–484, (2008) 387–390. [3]G.P. Zhang, K. Takashima, and Y. Higo, Fatigue strength of small-scale type 304 stainless steel thin films. Material Science and Engineering A, 426, (2006) 95-100. [4] W.N. Sharpe and K.T. Turner, Fatigue testing of materials used in microelectro mechanical systems. in: X.R. Wu, Z.G. Wang (Eds.), Fatigue 99, EMAS, UK, (1999)1837–1844. [5] E. Vanswijgenhoven and J.W. Holmes JW, Fatigue Crack Growth in Inconel 718 Superalloy Foil at Elevated Temperature. Fifth International Special Emphasis Symposium on Superalloys 718, 25, 706, and Derivatives, (2001) Pittsburgh, June, USA. [6]L. Liu and J.W. Holmes, Experimental technique for elevated temperature Mode I fatigue crack growth testing of Ni-base metal foils. Journal of Engineering Materials and Technology-TRANSACTIONS OF THE ASME, 129, (2007) 594-602. [7] J.Z. Xie, Low Cycle Fatigue and Fatigue Crack Growth Behavior of Alloy in 718 Superalloy 718, 625 and various Derivatives, The Minerals, Metals & Materials Society, (1991) 491–500. [8] L. A. James and W.J. Mills Effect of Heat-Treatment and Heat-to-Heat Variations in the Fatigue Crack Growth Response of Alloy 718. Eng. Fract. Mech., 22, (1985)797–817. [9] R.A. Meirom, T.E. Clark and C.L. Muhlstein, The role of specimen thickness in the fracture toughness and fatigue crack growth resistance of nanocrystalline platinum films. Acta Materialia, 60, (2012)1408–1417. [10] H.W. Wang, Y.L. Kang, Z. F. Zhang and Q.H. Qin, Size effect on the fracture toughness of metallic foil. Int J Fract., 123(3/4), (2003) 177–85. [11] Jong-Sung Bae, Chung-Seog Oh, Kyoung-Seok Park, Sang-Kyo Kim and Hak-Joo Lee, Development of a high cycle fatigue testing system and its application to thin aluminum film. Eng. Fract. Mech., 75, (2008) 4958-4964. [12] Chung-Youb Kim, Ji-Ho Song and Do-Young Lee, Development of a fatigue testing system for thin films. Int. J. Fatigue, 31, (2009)736-742. [13] Q.Y. Sun and H.C. Gu. Tensile and low-cycle fatigue behavior of commercially pure titanium and Ti–5Al–2.5Sn alloy at 293 and 77 K. Materials Science and Engineering A, 316, (2001)80-86. [14] Kenichi Takao and Kazuhiro Kusukawa, Low-cycle fatigue behavior of commercially pure titanium. Materials Science and Engineering A, 213, (1996)81-85. [15] T. Hanlon, E.D. Tabachnikov and S. Suresh, Fatigue behavior of nanocrystalline metals and alloys. International Journal of Fatigue, 27, (2005)1147–1158. [16] G.I. Barenblatt, Scaling, Cambridge University Press, Cambridge, U.K. 2003. [17] G.I. Barenblatt and L.R. Botvina, Incomplete self-similarity of fatigue in the linear range of crack growth. Fatigue Eng Mater Struct, 3(3), (1980)193–202.
RkJQdWJsaXNoZXIy MjM0NDE=