13th International Conference on Fracture June 16–21, 2013, Beijing, China -11- properties and forging process requirements, Superalloys 718, 625, 706 and various derivatives, (1994). [13] S. Suresh, Fatigue of Materials Second Edition, Cambridge University Press, (1998). [14] X. Huang et Al. Experimental investigations on microcrack initiation process in nickel-based superalloy DAGH4169. Int J Fatigue (2011). [15] T. Connolley, P. A. S. Reed, J. M. Starink, Short crack initiation and growth at 600°C in notched specimens of Inconel 718, Materials Science and Engineering, A340 1-2, pp. 139-154, (2003). [16] K. Tanaka and T. Mura, A dislocation model for fatigue crack initiation, journal of Applied Machanics, Vol.48, pp. 97-103, (1981), [17] Effect of Direct Aging on the microstructure and the mechanical properties of Alloy 718 A.Devaux, L.Nazé, A.Organista, J.Y.Guédou, P. Héritier, In preparation. [18] L. L. Li, P. Zhang, Z. J. Zhang, Z. F. Zhang, Effect of crystallographic orientation and grain boundary character on fatigue cracking behaviors of coaxial copper bicrystals, Acta Materialia 61, pp. 425-438, (2013). [19] D. D. Krueger, Stephen D. Antolovich, and R. H. Van Stone, Effects of grain size and precipitate size on the fatigue crack growth behaviour of alloy 718 at 427°C, Metallurgical transactions A, Vol.18A, (1987) [20] K. Shiozawa and L. Lu, Very high-cycle fatigue behaviour of shot-penned high-carbon-chromium bearing steel, Fatigue Fract Engng Mater Struct 25, pp. 813-822, (2002) [21] T. Sakai, Y. Sato and N. Oguma, Characteristic S-N properties of high-carbon-chromium-bearing steel under axial loading in long-life fatigue, Fatigue Fract Engng Mater Struct 25, pp. 765-773, (2002). [22] Y. Murakami, S. Kodoma and S. Konuma, Quantitative evaluation of effects of non-metallic inclusions on fatigue strength of high strength steel. Trans. JSME 54A, pp. 688-695, (1988) [23] Bernard H. Lawless and A. W. Dix, Effect of processing/microstructure on threshold fatigue crack growth behaviour of alloy 718 forging, Superalloys 718, 625, 706 and various derivatives, (2001). [24] J. E. King, Fatigue crack propagation in nikel-base superalloys – effects of the microstructure, load ratio and temperature, Materials science and technology, Vol.3, (1987). [25] J. P. Pédron, A. Pineau, the effect of the microstructure and environment on the crack growth behaviour of inconel 718 alloy at 650°C under fatigue, creep and combined loading, Materials science and engineering, 56, pp. 143-156, (1982). [26] A. Pineau, Short crack behavior in relation to three-dimensional aspects and crack closure effect, Small Fatigue Cracks. A publication of the Metallurgical Society, Inc. Warrendale, PA, (1986).
RkJQdWJsaXNoZXIy MjM0NDE=