13th International Conference on Fracture June 16–21, 2013, Beijing, China -9- [2] R.B. Waterhouse, Fretting fatigue. International Materials Reviews, 37(1992) 77-98. [3] J.M. Dobromirski, Variables of fretting process: are there 50 of them? AETM STP 1159, American Society for Testing and Materials, Philadelphia, 1992,pp. 60-66. [4] H. Mohrbacher, J.P. Celis, J.R. Roos, Laboratory testing of displacement and load induced fretting. Tribology International, 28(1995) 269-278. [5] H.A. Fadag, S. Mall, V.K. Jain, A finite element analysis of fretting fatigue crack growth behavior in Ti-6Al-4 V. Engineering Fracture Mechanics, 75(2008) 1384-1399. [6] N.K.R. Naidu, S.G.S. Raman, Effect of contact pressure on fretting fatigue behaviour of Al-Mg-Si alloy AA6061. International Journal of Fatigue, 27(2005) 283-291. [7] H.K. Kim, Y.H. Lee, S.P. Heo, Mechanical and experimental investigation on nuclear fuel fretting. Tribology International, 39(2006) 1305-1319. [8] J.A. Pape, R.W. Neu, Influence of contact configuration in fretting fatigue testing. Wear, 225-229(1999) 1205-1214. [9] C. Petiot, et al. An analysis of fretting-fatigue failure combined with numerical calculations to predict crack nucleation. Wear, 181-183(1995) 101-111. [10] A.L. Hutson, T. Nicholas, R. Goodman. Fretting fatigue of Ti-6Al-4V under flat-on-flat contact. International Journal of Fatigue, 21(1999) 663-669. [11] J.M. Wallace, R.W. Neu. Fretting fatigue crack nucleation in Ti-6Al-4V. Fatigue Fract Engng Mater Struct, 26(2003)199-214. [12] M.P. Szolwinski, T.N. Farris. Mechanics of fretting fatigue crack formation. Wear, 198(1996) 93-107. [13] T. Hattori, M. Nakamura, et al., Simulation of fretting-fatigue life by using stress-singularity parameters and fracture mechanics. Tribology International, 36(2003) 87-97. [14] Y. Liu, J.Q. Xu, Y. Mutoh, Evaluation of fretting wear based on the frictional work and cyclic saturation concepts. International Journal of Mechanical Sciences, 50 (2008) 897-904. [15] D.A. Hills, Mechanics of fretting fatigue. Wear, 175(1994) 107-113. [16] W. Klinger, IAEA-TECDOC-1345, 2002, pp 21-29. [17] R.B. Waterhouse. The Problems of Fretting Fatigue Testing, Standardization of Fretting Fatigue Test Methods and Equipment, ASTM STP 1159. American Society for Testing and Materials, Philadelphia, 1992: 13-19.
RkJQdWJsaXNoZXIy MjM0NDE=