Cover |
1 |
Brittle Cracking Processes during Fatigue Crack Propagation - R. O. Ritchie, J. Knott |
3 |
Constant-Cycle and Block-Programme Testing Needs S-N Curves Looked upon Statistically - A Job for Computer - M. Hanke |
6 |
Crack Formation and Fracture of Steels in the 300-3000 N/mm2 Range under Cyclic Loading with 20 kHz - R. Mitschke |
9 |
Crack Initiation at Notches in Low Cycle Fatigue - M. Ogasawara, M. Adachi |
11 |
Cumulative Damage and behaviour of Plastic Strain below Fatigue Limit - M. Kikukawa, M. Jono, J. Song |
15 |
Cyclic Deformation at a Crack Tip and its Correlation with Fatigue Crack Propagation - T.S. Kang, H.W. Liu |
18 |
Cyclic Deformation of Tubular Specimens under Repeated Torsion - T. Endo, K. Kooayashi |
21 |
Effect of Gross Plasticity on Fatigue Crack Propagation in Elliptically Notched Plates - C.V.B. Gowda, B.N. Leis, R.G. Charleton, D. W. Manhertz |
24 |
Elastic-Plastic Approach to Fatigue Crack Propagation and Fatigue Limit of Materials with Crack - H. Ohuchida |
26 |
Estimation of Low Cycle Fatigue Strengh of Steels in Strain Controlled Cycling Condition - T. Hotta, S. Kanazawa, T. Ishiguro, N. Ishii, S. Sekiguchi |
31 |
Fatigue Behaviours near Endurance Limit of Copper - J. Awatani, K. Katagiri, A. Omura, T. Shiraishi |
34 |
Fatigue Crack Growth in Metals and Polymers - B. Mukherjee |
37 |
Fatigue Crack Growth in Pure Shear - NJI. Adams |
40 |
Fatigue Crack Propagation in Martensitic and Austenitic Steels - R. Pelloux, C. Bathias |
43 |
Fatigue Crack Propagation under Consecutive Load Cycles with Varying Mean Loads and Amplitudes - H. Nowack |
45 |
Fatigue Crack Propagation under Mode I Conditions - B. Tomkins, J. Wareing, G. Sumner |
48 |
Fatigue Fracture of Steel Sheet when Loaded Orthogonally to the Plane of Rolling - H.-J. Bargel |
51 |
Fatigue Fractures as Reason for Failure of Pressure Vessels Operating under Cyclic Loads - W. Punk, H. Kreiskorte |
54 |
Fatigue Lifetime and Reliability of Prestrain Sensitive Materials under Random Loads - F.J. Legerer |
59 |
Fatigue Phenomena in Meehanite Cast Irons with Nodular Graphite - J. Pirs |
62 |
Fracture Behaviour of Cracked AISI 304 - A. C. Tubing, B. Henry, J. Bernard |
65 |
Fracture Mechanics Approach to Threshold Condition for Fatigue Crack Growth - H. Kitagawa |
68 |
Fundamental Aspects of Fatigue Fracture in Plastically Deformed Metals - M. Bily, M. Koudelka |
72 |
Influence of Dwelling Time on Low Cycle Fatigue - K.T. Rie |
75 |
Low Cycle Fatigue Behaviour of Smooth and Notched Specimens - K. Iida, Y. Urabe, G. Yagawa, Y. Ando |
80 |
Low Cycle Fatigue Crack Initiation in Notched Wide Plates - K. Iida, I. Soya, Y. Ando |
83 |
Low Cycle Fatigue Strength on Combined Stress Wave of Cast Steel - H. Yamanouchi, S. Yamamoto |
86 |
Low-Cycle Biaxial Fatigue Testing at Elevated Temperatures - K.J. Pascoe |
89 |
Multiaxial High Strain Fatigue - H. Liddle, K.J. Miller |
92 |
On the Crack Propagation in Low Cycle Fatigue - V.M. Radhakrishnan |
95 |
On the Decrease of Residual Stress Due to Cyclic Stress - S. Kodama |
98 |
On the influence of the R-Ratio on Fatigue Crack Propagation - A.J. McEvily, R. Kumble |
101 |
Planning and Evaluation of Fatigue-Test A Survey of Recent Results - W. Maening |
104 |
Stress-Strain Distribution near Crack Tips and Fracture Mechanisms in Fatigue of Metals - S. Taira, K. Tanaka |
107 |
Study of relation Between Lifetime Levels at the stages of Fracture Nucleation and Propagation under Cycle Loading - U. F. Balandin, I.V. Gorynin, G.P. Karzov |
110 |
Study of the Influence of Surface Defects of Steel Welded Joints upon the Process of Fatigue Failure - V. Gregor |
113 |
Subcritical Crack Growth under Intermittent Overloading in Cold-Rolled Steel - L.G. Vargas, R.I. Stephens |
116 |
The Conditions Low Cycle Crack Initiation and Propagation in Stress Concentration Zones - S.V. Serensen, N.A. Makhutov |
119 |
The Cyclic Stress-Strain Response of Metals and Alloys - C. Calabrese, C. Laird |
122 |
The Effect of Nitride Case-Hardening upon Fatigue Fracture in Torsion and in Push-Pull of an EN41B Steel - J.W. Martin, C.V.B. Gowda |
127 |
The Fatigue Fracture Behaviours and Metallurgical Factors of Alloyed High Strengh Steels - T. Araki |
130 |
The Influence of Crack Closure and Plastic Zone Geometry on Fatigue Crack Propagation - T.S. Lindley, C.E. Richards |
133 |
The Influence of Grain-Boundary Migration on the Fatigue Life of O.F.H.C. Copper and a Copper Alloy at 490°C - J. Cocks, D.M.R. Taplin |
136 |
The Materials Low Cycle Fatigue Evaluation with Regard to the Stress Concentration Factor - V.A. Ignatov, G.P. Karzov, M.P. Rozanov, B.T. Timofeev |
139 |
The Pulsating Tensile Fatigue Behaviour of CT-Specimens with Small Notch Root Radius - K. Heckel, R. Wagner |
142 |
The Role of Frequency and Environment in High Temperature Fatigue - L.P. Coffin |
145 |
Untersuchungen zur Zeitschwingfestigkeit hochfester Schrauben fur Kernreaktor-Druckbehalter - H. Kristof, E. Klausnitzer |
148 |
Vergleichende Untersuchungen zur Risskeimbildung an geachweissten ultrafesten Stählen bei einstufiger und mehrstufiger Belastung - H.-D. Steffens, H. Knösel |
151 |
Zu fraktographischen Besonderheiten von Bruchflächen und der Bruchzahlgkeit Ermüdungsexperimenten - V.S. Ivanova, L.R. Botvina, L.I. Maslov |
155 |
An Experimental Study the Transient Deformation Work in Front of a Sharp Notch in a Polymer - H. Oberg |
158 |
Bruchverhalten von verschieden molarem Polymethylmethacrylat - W. Döll |
161 |
Fracture Behaviour of Normal and Reinforced Thermoplastic Materials in Liquid Environment - G. Menges, H. Berg, R. Rieß |
164 |
Growth of Fatigue Cracks in Thermoplastics - S. Arad, J.C. Radon, L.E. Culver |
167 |
Infrared Spectroscopic Study of the Atomic Mechanism of the Growth of Crack in Polymers - N.S. Zhurkov, V.I. Vettegren, V.E. Korsukov, A.S. Tshmel |
170 |
Microscopic Fracture of Cross-Linked Polymers - K. Murakami, S. Tamura |
173 |
Motion of Crazing in Polymers - C.C. Hsiao |
177 |
On the Deformation and fracture Behavior Semicrystalline Polybutene -1 - G. Goldbach |
180 |
Progressive Failure of Random Network Structures - J.W. Dougill, K.J. Burt |
183 |
Rupture of Macromolecules at Orientational Drawing of Crystalline Polymers - U.G. Gafurov |
186 |
Study of Deformation of Crystalline Polymer by ESR Method - N. Kusumoto, H. Mukoyama, Y. Haga, O. Imamura |
190 |
Study of Local Heating at the Crack Tip of a Cyclically Deformed Polymer Specimen - V.R. Regel, A.M. Leksovskij, U. olibekov, M.V. Muchina |
192 |
A Fracture Model for Fiber Reinforced Cementitious Materials - .E. Naaman, A. Argon, F. Moavenzadeh |
195 |
Adhesive and Cohesive Failure Criteria of Unidirectional Fibre/Matrix Composites - W. Schneider |
198 |
Besonderheiten der Deformation und des Bruches von faserverstärkten Verbundwerk stoffen - V.S. Ivanov, I.M. Kopjev, J.E. Busalov |
201 |
Crack Arrest in Laminated Structures - L.J. Larson, H.F. Brinson |
204 |
Crack Branching In Homalite-100 Sheets - A.S. Kobayashi, B.G. Wade, W.B. Bradley, S.T. Chiu |
206 |
Crack Propagation in Carbon Fibre Composites - D.C. Phillips |
209 |
Critical Stress Intensity Factors for Glass Reinforced Plastics - M.J. Owen, P.T. Bishop |
212 |
Failure of Brittle Materials with Tougher Surface Coating - V. Weiss |
215 |
Fracture Mechanics under Combined Loading Modes of an Aluminium Matrix-Boron Fiber Composite - C.F.St. John, K.N. Street |
219 |
Fracture Mechanisms in Lamellar Eutectic Composites - N.S. Stoloff, Y.G. Kim, R.H. Bellows |
222 |
Fracture Toughness in Randomly Oriented Fibre Reinforced Materials - M.R. Piggott |
225 |
Fracture Toughness of Fiber-Reinforced Composites - G.C. Sih, N.J. Pagano |
228 |
Fracture Toughness of Laminated Steels - N.G. Ohlson |
231 |
Interaction between Parallel Cracks in Layered Composites - M. Ratwani, G.D. Gupta |
234 |
Mechanical Properties and Fracture Surfaces of Epoxide Resin / Glass Bead Composites - I. Katsura, Y. Takahashi |
237 |
Some Fatigue and Fracture Parameters of Fibre-Reinforced Composite Materials - A.K. Green, P.L. Pratt |
240 |
Start of Microcracking in GRP - G. Menges, H.J. Roskothen, H. Brintrup |
243 |
Stresses in Nonhomogeneous Materials with a Crack Terminating at and Crossing the Interface - F. Erdogan, T.S. Cook, V. Biricikoglu |
246 |
Structural Reliability Characterization of Advanced Composites - J.C. Halpin |
249 |
The Fracture of Notched Specimens of Layered Composite Materials - J.L. Xing, D. Mills |
252 |
The Fracture Toughness of Glass Reinforced Plastics Containing Randomly Oriented Fibres - A.W. Holgsworth, S. Morris |
255 |
The Influence of Fibre-Matrix Reactions on the Fracture of Composites with Aluminium and Nickel as Matrix Materials - J. Hoffmann, K.E. Saeger |
258 |
A Comparison of the Prediction of the Stress Concentration Theory of Fracture Mechanics with a Number of Actual Failures of Large Plant Components - W.H. Irvine, A. Quirk |
261 |
A Systems Approach to the Avoidance of Brittle Fracture in Pressure Vessels - T. Varga |
264 |
Consideration of the Practical Use of Fracture Mechanics Technology with Particular Reference to Pressure Vessels - K. Wellinger, W. Schoch, K. Kussmaul, E. Kraegeloh |
267 |
Estimation of Turbine Rotor Tendency to Brittle Fracture - Yu.N. Rabotnov, G.S. Vasilchenko, P.P. Koshelev, G.N. Merinov, Yu.P. Rybovalov |
269 |
Experimental Verification for Application of Fracture Mechanics to Failure of Pressure Vessel - J. Imamasa, T. Miki |
282 |
Fracture Control in Welded Structures - G.R. Egan |
285 |
Fracture Mechanics Aircraft Structural Design / Application and Releated Research - H.A. Wood, N. Tupper |
288 |
Fracture Mechanics, a Practical Tool for Preventing Failures - J.A. Begley, J.D. Landes, E.T. Wessel |
292 |
Fracture Toughness in a High Carbon Steel - B.L. Averbach |
296 |
Post Yield Fracture Mechanics - P.J. Worthington, G.M. Spink, P.T. Heald |
298 |
Post-Yield Fracture Mechanics and its Application in Turbo-Generator Problems - G.T. Jones |
301 |
Sprödbruchanalyse von Reaktordruckbe¬hältern für idealisierte und naturliche Werkstoffehler - M. Mikach |
304 |
Stability of a Part-Through Crack in a Material Sensitive to Strain-Hardening - J. Dufresne |
306 |
The Application of Fracture Mechanics to the Problem of Reheat Cracking in Low Alloy Steels during Postweld Heat Treatment - G.G. Saundera |
309 |
The Relationship between Dynamic Fracture Toughness and the Conditions for Crack Arrest in a Large Structure - C.L. Formby |
312 |
About Principles of Chip Formation from Rock Treatment with Cutting Tools - K. Gehring |
315 |
Behaviour of Concrete under Triaxial Loading - D. Linse, H. Kupfer |
321 |
Beitrag zum Bruchmechanismus von auf Druck beanspruchtem Beton - G. Wischers, M. Lusche |
324 |
Bruchmochanismen in keramischen Werkstoffen mit Eigenspannungen - P.B. Buresch |
327 |
Crack Accumulation in Pavement System - J.E. Soussou, H. Findakly |
330 |
Crack Propagation In Glasses and Polymers - J.E. Field, K.N.G. Fuller, M.J. Twigg |
332 |
Das Bruchverhalten von Mehrfachrissen - J.P. Kalthoff |
336 |
Design of Tunnel Support Based on the Post-Failure-Behaviour of the Rock - P. Egger |
339 |
Energy Dissipating Process in the Compression of Cement Paste and Concrete - D.C. Spooner, C.D. Pomeroy |
342 |
Failure of Quasi Brittle Materials Under Thermal Stress - J.W. Dougill |
344 |
Fracture Mechanism of Concrete Under Compressive Loads - S.I. Diaz, H.K. Hilsdorf |
349 |
Fracture Mechanisms in Concrete System under Uniaxial Loading - R. N. Swamy |
352 |
Fracture of Porous Viscoelastic Materials - J.W. Zaitaev |
355 |
Fracture Studies of Commercial Polycrystalline Aluminas - H. Meredith, F.L. Fratt |
358 |
Fracture Toughness of Cement Paste and Mortars - J.H. Brown, C.D. Pomeroy |
361 |
In-Situ Measurements in Jointed Rock Masses as a Means to Study their Failure Behaviour - L. Muller, H.P. Gotz |
364 |
Influence of Constant Rate of Loading on Ultimate Strain of Lightweight Concrete - F. Kruml |
368 |
La Propagation de la Rupture en Compression dans les Roches Cristallines - R. Houpert |
371 |
On the Fatigue Behaviour of Plain Concrete State of Knowledge - K. Wesche, J.W. Weber, W. Kunze |
374 |
On the Influence of Differential Load Application Techniques on the Lateral Strain and Fracture of Concrete Specimens - G. Schickter |
377 |
Specimens - G. Schickter
Probleme bei der Bestimmung kritischer Spannungsintensitatsfaktoren keramischei Werkstoffe - H.F. Pabst |
380 |
The Application of Fracture Mechanics to Prestressed Concrete Pressure Vessels - G.D.T. Carmichael, K. Jerram |
383 |
The Hugoniotelastlic Limit (HEL) and Influencing Factors - C. O. Leiber |
386 |
A Study of the Fragmentation of Cylindrical shells of Four Carbon Steels - L. Eriksson, T. Arvidsso |
389 |
About Temperature and Light Emission at the Fast Crack Propagation - R. Weichert, K. Schönert |
395 |
Acoustic Emission Detection and Measure­ment of the Voltage Drop during the Crack Propagation in Weld Metal - J. Beges, F. Erdmann-Jesnitzer, D. Rehfeldt |
398 |
Application of Fracture Mechanics to Ductile Material - W. Soete |
407 |
Atomic Mechanism of Fracture of Solid Polymers - S.N. Zhurkov |
409 |
Bestimmung bruchmechanischer Kennwerte durch den instrumentierten Kerbschlagversuch - G. Vasoukis |
421 |
Bruchmechanische Untersuchungen an 3.5% Nickel Stalen fur grosse Schrauben hoher Festigkein -E Klausnitzer |
425 |
Dislocations and Cracks - B.A. Bilby |
428 |
Environmental Factors in Crack Propagation - J.C. Scully |
439 |
Fracture Mechanics Investigation of 18 Ni Maraging Steel Weldments - J.G. Blauel, H. Smith |
467 |
Fracture of Hardened Cement Paste and Concrete - F. Radjy, T.C. Hansen |
471 |
Initiation and Propagation of Fracture in Ceramics - V.D. Frechette |
486 |
Kinetics of Cracks caused by Hydrogen in Iron - F. Erdmann-Jesnitzer |
498 |
Mechano-Chemical Aspects of Fracture of Highly Oriented Semicrystalline Fibers - J. Becht, H.H. Kausch |
506 |
The Sources of Dynamic Fracture Toughness Of Steels - G.J. Dvorak |
509 |
Unstable Crack Length. Effective Specific Surface Energy and COD Concept in the Brittle Fracture of Structural Steels - A. Kochendörfer, H.D. Schulze |
512 |