| Cover |
1 |
| A fracture driving force and failure assessment curve analysis for weldment with mechanical heterogeneity - M. Zhang, Y. W. Shi, J. Q. Fu, J. X. Zhang |
3 |
| A RLA based maintenance strategy to extend life of equipments and plants - D. K. Mahanty, S. K. Bhave |
8 |
| Analysis of one-sided bonded repair to a cracked thick plate - C. Zhu, Y. C. Lam |
13 |
| Analytical PWR vessel integrity assessment by tearing instability theory- J. R. Tarpani, D. Spinelli |
18 |
| Behavior of cracked branch pipes subject to out of plane bending - S. Chapuliot, D. Moulin, G. Goudet, J. Bourg |
23 |
| Boiler feed water pump shaft life assessment through residual stress measurement - K. Rajanna, C. R. Prasad, G. Jayaraman |
28 |
| Brittle and ductile fracture transition in steels subjected to mixed mode loading - T. D. Swankie, J. C. W. Davenport, D. J. Smith |
33 |
| Characterisation of creep fracture at interfaces in weldments - R. A. Ainsworth |
38 |
| Characterisation of hydrogen induced fracture in the titanium alloy IMI685 - M. R. Bache, H. M. Davies, W. J. Evans |
43 |
| Cleavage fracture of a high strength steel weld metal - R. K. Hughes, J. C. Ritter |
48 |
| Cleavage stress on the delamination plane of a plate steel - J. Sun, J. D. Boyd |
53 |
| Comparison of models for sustained load crack growth in aluminium gas cylinders - J. W. H. Price, R. N. Ibrahim, D. Ischenko |
58 |
| Conceptualization of crack closure mechanism maps - V.K. Saxena, V. M. Radhakrishnan |
63 |
| Crack resistance behaviour of a CrMoV pressure vessel steel - E. Schick, H. Blumenauer, P. Veit |
68 |
| Creep - fatigue interaction and life time prediction of AISI 316 stainless steel at 550°C- M. Marchionni, D. Ranucci |
73 |
| Creep-fatigue cavities and their transition to small cracks along grain boundaries in type 304 stainless steel - N. Tada, T. Kitamura, R. Ohtani, T. Fukuta |
78 |
| Creep-fatigue crack grow thin power-plant materials and components - A. Saxena |
83 |
| Creep-fatigue damage analysis on pre-strained stainless steel type 321 by tube working in an operating boiler 291 - M. Nakashiro, T. Yoshida, M. Kitagawa, H. Umaki |
90 |
| Creep-fatigue life evaluation for weldment of modified 9Cr-1 Mo steel - I. Nonaka, S. Torihata, S. Kihara |
95 |
| Cyclic plastic deformation-induced martensitic transformation in austenitic steels - J. Kaleta, G. Zietek |
100 |
| Design analysis and validation for a bonded composite repair to primary aircraft structure - L. R. F. Rose |
104 |
| Design for cyclic loading in transport - R . A . Smith |
111 |
| Determination of residual stresses and the resulting stress intensity factors in the ligament of pre-cracked plates - H. J. Schindler, I. Finnie |
119 |
| Effect of hydrogen on fracture morphology of hydrogen assisted cracking in steel weldments - N. Alam, H. Li, L. Chen, D. Dunne |
124 |
| Evaluation of creep crack growth rate in terms of creep fracture mechanism for 316 stainless steel - M. Tabuchi, K. Kubo, K. Yagi |
130 |
| Experimental and numerical investigations on ductile-to-brittle transition in a carbon steel - C. Yan, Y.W. Mai, S.X. Wu |
135 |
| Experimental study of damage kinetics in alfa/beta titanium alloys - A . L. Helbert, X. Feaugas, M. Clavel |
140 |
| Failure analysis of adhesively bonded joints - C. H. Wang, L. R. F. Rose |
145 |
| Failure assessment diagrams and mixed mode loading and cracked tubular joints - F. M. Burdekin, G. J. Yang |
150 |
| Failure assessment of cast steel bridge piers by the CEGB R6-concept of fracture mechanics - H. Amstutz, W. Dahl, P. Langenberg, T. Seeger |
157 |
| Failure life prediction by simple tensile test under dynamic load - S. M. Yang, H. Y. Kang, J. H. Song, S. J. Kwon, H. S. Kim |
162 |
| Fatigue crack propagation and remaining life assessment of ship structures - Y. Sumi |
167 |
| Fatigue life assessment of steel pressure vessels with varying stress concentration, residual stress and initial cracks - J . H. Underwood, A. P. Parker |
175 |
| Fatigue propagation assessment of turbine blade cracks - P. J. Haylen |
182 |
| Fracture assessment of ductile crack growth in weld material from a full-thickness clad RPV shell segment - J. A. Keeney |
187 |
| Fracture behaviour of a single crystal nickel base superalloy SC16 - A. Rumi, W. Chen, H. Fecht, H. Wever, R. P. Wahi |
192 |
| Fracture mechanics of materials and methods of assessment of structures service life-time: success and prospects - V. V. Panasyuk, O. Ye. Andreykiv |
198 |
| Fracture toughness of high strength AA 2090 thin sheet -
R . Doglione, F. Arena, D. Firrao |
205 |
| Influence of environment at 500°C on fatigue behaviour in a Ti6246 alloy -
S. Lesterlin, C. Sarrazin-Baudoux, J. Petit |
209 |
| Influence of weld joint mechanical properties on fracture toughness -
V. Gliha, I. Rak, N. Gubeljak, M. Kocak |
214 |
| Interaction between hydrogen diffusion and crack growth in hydrogen assisted cracking -
J. Toribio, V. Kharin |
219 |
| Investigation of weld failure in superaustenitic UNS S3l245 stainless steel -
B. Dixon |
224 |
| Life assessment for high temperature components - techniques and models -
A. N. Kumar |
229 |
| Life extension of fatigue damaged components -
Z. Domazet |
236 |
| Life prediction of solders in electronics -
W. J. Plumbridge |
240 |
| Linking scales in fracture mechanics -
John W. Hutchinson |
247 |
| Mechanical behaviour and failure criterion of Ti-6Al-4V alloy at room and cryogenic temperatures -
G. Laurent, G. Cailletaud, L. Remy |
255 |
| Morphological effect of grains on high temperature creep fracture in P/M tungsten fine wires -
K. Tanolle |
260 |
| Prediction of fatigue interaction from static creep and high frequency fatigue crack growth data -
K. Nikbin, J. Radon |
265 |
| Prediction of fracture in the transition regime: application to an A533B pressure vessel steel -
C. Eripret, D. P. G. Lidbury, A . Sherry, I. Howard |
269 |
| Prediction of high temperature creep fracture life by harmonizing mechanical, microstructural and physical methodologies -
A. Toshimitsu Yokobori Jr |
274 |
| Recent techniques for residual life assessment of materials serving fossil fuel firing aged power plants -
I. Nonaka, M. Kitagawa |
280 |
| Remaining life assessment of a HP-rotor -
R. W. Coade, S. Nowak |
287 |
| Residual stress effects on safe-life of welded structures -
J. B. Chang, S. T. Chiu, D. L. Goodembeger |
292 |
| SCC initiation for 4340 in distilled water -
A . Atrens, Z. F. Wang, J. Q. Wang |
297 |
| Small-crack growth and life prediction for LY12cz aluminum clad alloy -
X. R. Wu, H. Yu |
302 |
| Structural integrity for downstream operations in the oil industry -
M. J. Humphries, N. V. Bangaru, M. J. Luton, D. M. R. Taplin |
306 |
| Tensile behavior of intercritically treated high martensite dual-phase steel -
A. Bag, M. Menon, K. K. Ray, E. S. Dwarakadasa |
307 |
| The effect of cold work on the liquid metal induced embrittlement of brass by gallium -
R . E. Clegg, D. R. H. Jones |
312 |
| The estimation of probability values for fracture toughness after neutron irradiation -
P. L. Windle |
316 |
| The identification of fatigue-critical regions during fatigue testing of Macchi MB326H centre section lower booms -
S. Barter, N. Athiniotis, G. Clark |
321 |
| The role of oxidation on the creep behaviour of a commercial purity nickel -
M . C. Pandey, S. Srinivas |
326 |
| The significance of intergranular cavitation in creep-fatigue -
V. Sklenicka |
331 |
| Thoughts on assessing and maintaining structural integrity -
R. Jones |
336 |
| Triaxiality effects on hydrogen-assisted micro-damage evolution in eutectoid steel -
J. Toribio, E. Vasseur |
343 |
| A fracture driving force and failure assessment curve analysis for weldment with mechanical heterogeneity -
M. Zhang, Y. W. Shi, J. Q. Fu, J. X. Zhang |
348 |
| A RLA based maintenance strategy to extend life of equipments and plants -
Dilip K. Mahanty, S. K. Bhave |
353 |
| Analysis of one-sided bonded repair to a cracked thick plate -
C. Zhu, Y. C. Lam |
358 |
| Analytical PWR vessel integrity assessment by tearing instability theory -
J. R. Tarpani, D. Spinelli |
363 |
| Behavior of cracked branch pipes subject to out of plane bending -
S. Chapuliot, D. Moulin, G. Goudet, J. Bourg |
368 |
| Boiler feed water pump shaft life assessment through residual stress measurement -
K. Rajanna, C. R. Prasad, G. Jayaraman |
373 |
| Brittle and ductile fracture transition in steels subjected to mixed mode loading -
T. D. Swankie, J. C. W. Davenport, D. J. Smith |
378 |
| Characterisation of creep fracture at interfaces in weldments -
R. A. Ainsworth |
383 |
| Characterisation of hydrogen induced fracture in the titanium alloy IMI685 -
M. R. Bache, H. M. Davies, W. J. Evans |
388 |
| Cleavage fracture of a high strength steel weld metal -
R. K. Hughes, J. C. Ritter |
393 |
| Cleavage stress on the delamination plane of a plate steel -
J. Sun, J. D. Boyd |
398 |
| Comparison of models for sustained load crack growth in aluminium gas cylinders -
J. W. H. Price, R. N. Ibrahim, D. Ischenko |
403 |
| Conceptualization of crack closure mechanism maps -
V. K. Saxena, V. M. Radhakrishnan |
408 |
| Crack resistance behaviour of a CrMoV pressure vessel steel -
E. Schick, H. Blumenauer, P. Veit |
413 |
| Creep - fatigue interaction and life time prediction of AISI 316 stainless steel at 550°C -
M. Marchionni, D. Ranucci |
418 |
| Creep crack growth and constraints in weldments -
T. Vilhelmsen, G. A . Webster |
423 |
| Creep-fatigue cavities and their transition to small cracks along grain boundaries in type 304 stainless steel -
N. Tada, T. Kitamura, R. Ohtani, T. Fukuta |
428 |
| Creep-fatigue crack grow thin power-plant materials and components -
A. Saxena |
433 |
| Creep-fatigue damage analysis on pre-strained stainless steel type 321 by tube working in an operating boiler 291 -
M. Nakashiro, T. Yoshida, M. Kitagawa, H. Umaki |
440 |
| Creep-fatigue life evaluation for weldment of modified 9Cr-1 Mo steel -
I. Nonaka, S. Torihata, S. Kihara |
445 |
| Cyclic plastic deformation-induced martensitic transformation in austenitic steels -
J. Kaleta, G. Zietek |
450 |
| Design analysis and validation for a bonded composite repair to primary aircraft structure -
L. R. F. Rose |
454 |
| Determination of residual stresses and the resulting stress intensity factors in the ligament of pre-cracked plates -
H. J. Schindler, I. Finnie |
461 |
| Effect of hydrogen on fracture morphology of hydrogen assisted cracking in steel weldments -
N. Alam, H. Li, L. Chen, D. Dunne |
466 |
| Evaluation of creep crack growth rate in terms of creep fracture mechanism for 316 stainless steel -
M. Tabuchi, K. Kubo, K. Yagi |
472 |
| Experimental and numerical investigations on ductile-to-brittle transition in a carbon steel -
C. Yan, Y.W. Mai, S.X. Wu |
477 |
| Experimental study of damage kinetics in alfa/beta titanium alloys -
A . L. Helbert, X. Feaugas, M. Clavel |
482 |
| Failure analysis of adhesively bonded joints -
C. H. Wang, L. R. F. Rose |
487 |
| Failure assessment diagrams and mixed mode loading and cracked tubular joints -
F. M. Burdekin, G. J. Yang |
492 |
| Failure assessment of cast steel bridge piers by the CEGB R6-concept of fracture mechanics -
H. Amstutz, W. Dahl, P. Langenberg, T. Seeger |
499 |
| Failure life prediction by simple tensile test under dynamic load -
S. M. Yang, H. Y. Kang, J. H. Song, S. J. Kwon, H. S. Kim |
504 |
| Fatigue crack propagation and remaining life assessment of ship structures -
Y. Sumi |
509 |
| Fatigue life assessment of steel pressure vessels with varying stress concentration, residual stress and initial cracks -
J . H. Underwood, A. P. Parker |
517 |
| Fatigue propagation assessment of turbine blade cracks -
P. J. Haylen |
524 |
| Fracture assessment of ductile crack growth in weld material from a full-thickness clad RPV shell segment -
J. A. Keeney |
529 |
| Fracture behaviour of a single crystal nickel base superalloy SC16 -
A. Rumi, W. Chen, H. Fecht, H. Wever, R. P. Wahi |
534 |
| Fracture mechanics of materials and methods of assessment of structures service life-time: success and prospects -
V. V. Panasyuk, O. Ye. Andreykiv |
540 |
| Fracture toughness of high strength AA 2090 thin sheet -
R . Doglione, F. Arena, D. Firrao |
547 |
| Growth characterisation of fatigue cracks repaired with adhesively bonded boron/epoxy patches -
A. Baker |
551 |
| Influence of environment at 500°C on fatigue behaviour in a Ti6246 alloy -
S. Lesterlin, C. Sarrazin-Baudoux, J. Petit |
558 |
| Influence of weld joint mechanical properties on fracture toughness -
V. Gliha, I. Rak, N. Gubeljak, M. Kocak |
563 |
| Interaction between hydrogen diffusion and crack growth in hydrogen assisted cracking -
J. Toribio, V. Kharin |
568 |
| Investigation of weld failure in superaustenitic UNS S3l245 stainless steel -
B. Dixon |
573 |
| Life assessment for high temperature components - techniques and models -
A. N. Kumar |
578 |
| Life extension of fatigue damaged components -
Z. Domazet |
585 |
| Life prediction of solders in electronics -
W. J. Plumbridge |
589 |
| Linking scales in fracture mechanics -
John W. Hutchinson |
596 |
| Mechanical behaviour and failure criterion of Ti-6Al-4V alloy at room and cryogenic temperatures -
G. Laurent, G. Cailletaud, L. Remy |
604 |
| Morphological effect of grains on high temperature creep fracture in P/M tungsten fine wires -
K. Tanolle |
609 |
| Prediction of fatigue interaction from static creep and high frequency fatigue crack growth data -
K. Nikbin, J. Radon |
614 |