| Cover |
1 |
| Prediction of fracture in the transition regime: application to an A533B pressure vessel steel -
C. Eripret, D. P. G. Lidbury, A . Sherry, I. Howard |
3 |
| Prediction of high temperature creep fracture life by harmonizing mechanical, microstructural and physical methodologies -
A. Toshimitsu Yokobori Jr |
8 |
| Recent techniques for residual life assessment of materials serving fossil fuel firing aged power plants -
I. Nonaka, M. Kitagawa |
14 |
| Remaining life assessment of a HP-rotor -
R. W. Coade, S. Nowak |
21 |
| Residual stress effects on safe-life of welded structures -
J. B. Chang, S. T. Chiu, D. L. Goodembeger |
26 |
| SCC initiation for 4340 in distilled water -
A . Atrens, Z. F. Wang, J. Q. Wang |
31 |
| Small-crack growth and life prediction for LY12cz aluminum clad alloy -
X. R. Wu, H. Yu |
36 |
| Structural integrity for downstream operations in the oil industry -
M. J. Humphries, N. V. Bangaru, M. J. Luton, D. M. R. Taplin |
40 |
| Tensile behavior of intercritically treated high martensite dual-phase steel -
A. Bag, M. Menon, K. K. Ray, E. S. Dwarakadasa |
41 |
| The effect of cold work on the liquid metal induced embrittlement of brass by gallium -
R . E. Clegg, D. R. H. Jones |
46 |
| The estimation of probability values for fracture toughness after neutron irradiation -
P. L. Windle |
50 |
| The identification of fatigue-critical regions during fatigue testing of Macchi MB326H centre section lower booms -
S. Barter, N. Athiniotis, G. Clark |
55 |
| The role of oxidation on the creep behaviour of a commercial purity nickel -
M . C. Pandey, S. Srinivas |
60 |
| The significance of intergranular cavitation in creep-fatigue -
V. Sklenicka |
65 |
| Thoughts on assessing and maintaining structural integrity -
R. Jones |
70 |
| A hypothesis of cumulative damage for fatigue crack initiation and propagation -
K. M . Golos |
77 |
| A new model of short crack closure -
J. Jianchun, D. Taylor |
82 |
| A simple model to predict fatigue strength with out-of-phase tension-bending and torsion stress condition -
D. Duprat, R. Boudet, A. Davy |
87 |
| A study of fatigue crack propagation mechanisms of a non-crystalline polymer -
Y. Bokoi, Y. Shiraishi, Y. Higo |
92 |
| Acoustic emission during fatigue of aircraft aluminium alloys -
G. Clark. P. K. Sharp, J. Q. Clayton |
96 |
| Analytic solution for fatigue life prediction under broad band random loading -
P. Lu |
101 |
| Application of the weakest link model to the fatigue limit of a hard bainitic steel -
H. Bomas, T. Linkewitz, P. Mayr, F. Jablonski, R. Kienzler, K. Kutschan |
106 |
| Behaviour of a spheroidal graphite cast iron in high cycle multiaxial fatigue under random loading spectrums in block -
T. Palin-Luc, S. Lasserre, J.- Y. Berard |
111 |
| Computer-controlled device for in-situ SEM study of the fatigue behaviour of metals and ceramics -
O. Mouritsen, B. L. Karihaloo |
116 |
| Correlation between hysteresis loops and substructure alterations during fatigue crack initiation -
H . H. EI-Sharawy, F. L. Bastion |
120 |
| Crack closure and microstructurally short fatigue crack growth rates -
K. Gall, H. Sehitoglu |
125 |
| Cyclic elastic-plastic strain behavior ahead of notches under cyclic tensile load and fatigue life -
K. Shingai |
130 |
| Deformation and fracture of a titanium alloy under bi-axial fatigue -
M. R. Bache, W. J. Evans |
135 |
| Dwell fatigue on TI 6246 at near ambient temperatures -
S. H. Spence, W. J . Evans, M. Cope |
140 |
| Editing for accelerated fatigue testing using strain range and SWT parameter criteria -
R. I. Stephens, J. E. Gunger |
145 |
| Effect of R ratio on fatigue crack growth characteristics of maraging steel -
K. Hussain, A. Tauqir, A. Ul Haq, A. Q. Khan |
149 |
| Effect of strengthening mechanisms on fatigue properties of low carbon dual phase sheet steel -
M. Kurita . M. Yamamolo, K. Tovama, N. Komatsubara, K. Kunishige |
154 |
| Effect of Young's modulus on fatigue crack propagation under variable loading -
H. Masuda, S. Matsuoka |
159 |
| Effects of crystallographic orientation on fatigue crack growth in titanium single crystals
K. Takashima, Y. Mine, S. Ando, H. Tonda, Y. Higo, P. Bowen |
163 |
| Environmentally assisted small fatigue crack growth in 7017 aluminium alloy -
Z.-J. Lu, W. J. Evans |
168 |
| Evaluation of fatigue strength of adhesive bonded box section beams -
N. Tomioka, M. Kakiage |
173 |
| Fatigue crack closure in Al-Li 2090 alloy -
H. Y. Jung, S. D. Antolovich |
178 |
| Fatigue crack growth in particle-reinforced metal matrix composites -
B. Ellyin |
185 |
| Fatigue crack growth in transformation toughening ceramics
J. H. Andreasen, C. V. Moller |
190 |
| Fatigue crack growth in transformation toughening ceramics -
J. H. Andreasen, C. V. Moller |
197 |
| Fatigue crack growth of Al 7475 T761 under constant and variable amplitude loading -
C. P. M. Pereira, H. J. C. Voorwald |
202 |
| Fatigue crack initiation and growth in titanium alloy matrix composite -
T. Tagawa, E. Wadahara, T. Miyala |
207 |
| Fatigue crack initiation and growth of stainless steels in 3% NaCl solution
M. Nakajima, Y. Akalsuka, K. Tokaji |
212 |
| Fatigue crack propagation and crack closure in grey and austempered ductile cast irons -
W. Wenfong, M . N. James |
217 |
| Fatigue design in engineering materials -
J. F. Knoll |
222 |
| Fatigue failure from sub-surface defects in a gas turbine disc alloy at elevated temperature -
J. Byrne, N. Y. K. Kan, I. W. Hussey, G. F. Harrison |
229 |
| Fatigue growth behavior of short cracks in alfa/beta SiAlON 1200°C -
G.-D. Zhan, M. J. Reece, J.-L. Shi, T.-S. Yen |
234 |
| Fatigue life prediction by statistical approach under constant amplitude loading -
O. S. Lee, C. Park, M. K. Han |
239 |
| Fatigue life under biaxial stress state with different cross-correlation coefficients of normal stresses -
T. Lagoda, E. Macha |
244 |
| Fatigue of an aluminum alloy under predominantly compressive loadings -
N. Ranganathan |
249 |
| Fatigue on full locked coil rope under bending in tramways systems -
G. Crespo, Z. Cassier |
254 |
| Fatigue properties of thermal sprayed steel with Co-based self-fluxing alloy -
J. Komolori, N. Qu, M. Shimizu, K. Shirai |
258 |
| Fracture and fatigue crack growth behavior of high martensite dual-phase steel -
A. Bag, K. K. Ray, K. Aprameyan, E. S. Dwarakadasa, K. V. Sudhakar |
262 |
| Fracture and fatigue of Al2O3 based microsphere/6061-T6 aluminium metal matrix composite -
A. K. Heflier, A. Crosky, B. G. Park |
267 |
| High cycle fatigue analysis in mechanical design -
K. Dang Van |
272 |
| Influence of cryogenic temperatures and media on the fatigue failure resistance of Al-Li alloys -
V. A. Serdyuk, Yu A. Pokhif |
279 |
| Influence of microstructure on the fatigue crack growth behaviour of titanium alloys at high temperature -
C. Sarrazin-Baudoux, S. Lesterlin, J . Petit |
283 |
| Influence of moist atmospheres on fatigue crack propagation -
J. Petit, G. Henalf, C. Sarrazin-Baudoux, S. Lesterlin |
288 |
| Interrelation between inelasticity and high-cycle fatigue of metals -
V. T. Troshchenko |
295 |
| Low cycle fatigue crack propagation behavior of 1.5Cr-0.7Mo steel at high temperature -
S. H. Song, M. S. Kang, K. Y. Kim |
302 |
| Notch effect in high cycle fatigue -
G. Pluvinage |
307 |
| On the growth of fatigue cracks in advanced ceramics and intermetallics -
R. O. Ritchie |
314 |
| Overload induced fatigue crack growth and significance of retardation zone -
R. K. Pandey, B. B. Verma |
315 |
| Plastic instabilities during fatigue cycling -
A. Abel |
322 |
| Point contact surface fatigue in single crystal and polycrystalline magnesium oxide -
C. Maerky, J. L. Henshall, R . M. Hooper, M.-O. Guillou |
328 |
| Probabilistic mechanics modeling of fatigue crack growth and fracture
A. B. O. Soboyejo |
333 |
| Rotating-bending fatigue of a TiNi shape-memory alloy wire -
H. Tobushi, T. Hachisuka, S. Yamada, P. H. Lin |
338 |
| Small crack growth behaviour in oil environments -
M. Goto, N. Kawagoishi, H. Miyegawa, H. Nisitani |
343 |
| The calculations in a whole process of fatigue-damage-fracture for components -
Y. Yangui, J. Jianrong |
348 |
| The correlations among each parameter in some equations on crack growth stage -
Y. Yangui, J. Jianrong |
354 |
| The effect of microstructure and prestrain on fatigue crack propagation of dual-phase steels -
K. Nakajima, M. Yokoe, T. Miyata |
358 |
| The effect of peening on the fatigue life of aluminium alloys -
P. K. Sharp, G. Clark |
363 |
| The effect of small defects and residual stresses on fatigue -
T. C. Lindley |
368 |
| The effect of tempering temperature on the high cycle fatigue properties of high strength spring steels -
K. A. Lee. W. J. Nam, S. J. Yoo, N. J. Kim, C. S. Lee |
372 |
| The effects of localised stress field near the crack tip on fatigue striation alignment in Fe-3%Si single crystals -
M. Shimojo, Y. Uchida, Y. Higo |
377 |
| The theory of longterm fatigue fracture providing for cracks initiation and propagation -
Vladyslav P. Goluh |
382 |
| 3D cracks growth in materials with gas emission in bulk -
A. V. Balueva |
387 |
| 3D finite element modelling of a composite patch repair -
A. Mahadesh Kumar, R. Singh |
392 |
| 3D singular stresses in a cracked plate -
X. M. Su, C. T. Sun |
397 |
| A cell model for ductile fracture with applications to the transition regime -
C. Fong Shih, L. Cheng, J. Faleskog, X. Gao |
402 |
| A higher order fatigue crack paths simulation by the MVCCI-method -
H. Theilig, R. Daring, F.-G. Buchholz |
409 |
| A J-integral approach for evaluating the influence of residual stresses on fracture behavior -
M. Pereira, H. Wohlfahrt, F. Darwish |
414 |
| A more concise systematization of unified fracture theory -
T. Yokobori |
419 |
| A new approach to interacting 3D cracks -
S. Pill |
426 |
| A simple method of J-integral estimate for biaxially stressed mode I cracks -
M. Sakane, T. Itoh, M. Ohnami |
431 |
| A topology based system for simulating 3D crack growth in solid and shell structures -
B. J. Carter, C.-S. Chen, A. R . Ingraffea, P. A. Wawrzynek |
436 |
| An embedded-crack finite element approach to quasi-brittle fracture -
G. Bolzon, A. Corigliano |
443 |
| Application of the Griffith energy approach to non-classical problems of fracture -
L. V. Nikilin |
448 |
| Asymptotic analysis in fracture -
J. R. Willis |
455 |
| Branching problem of a crack and a debonding at the end of a clamped edge of thin plate -
N. Hasebe, M. Miwa, M. Nakashima |
461 |
| Circular rigid punch with one smooth and another sharp ends on an edge cracked matrix acted by concentrated forces -
J. Qian, N. Hasebe |
466 |
| Coating cracks in materials under an antiplane concentrated load -
C. K. Chao |
471 |
| Cohesive surface modeling of fast crack growth -
A. Needleman |
475 |
| Computational mechanics of interfacial fracture for composite debonding and of elastoplastic fracture with multi-site-damage -
S. N. Atluri, W. T. Chow, L. Wang |
481 |
| Computational modelling of concrete fracture -
R. de Borst |
488 |
| Computer simulation of brittle crack propagation and arrest of steel plate with temperature gradient based on local fracture stress criterion
S. Machida, H. Yoshinari, S. Aihara |
495 |
| Constraint effects in mixed mode loading -
J. W. Hancock, A. Nekkal, A. D. Karstensen |
502 |
| Crack growth path and SIF distribution studies in 3D cases -
C. W. Smith |
507 |
| Effects of an electric field on the energy release rate: a self-consistent analysis -
T.- Y. Zhang, C.-F. Qian, P. Tong |
512 |
| Evolution equations of stable and unstable crack propagation -
A . Neimitz |
519 |
| Finite deformation analysis of crack growth in elastic body -
V. A. Levin, V. V. Lokhin, K. M. Zingerman |
523 |
| Fracture analysis of cracked spherical shells -
R. Liu, C. H. Wang, R. G. Bathgate |
527 |
| Holonomic analysis of quasibrittle fracture with nonlinear softening -
F. Tin-Loi, M. C. Ferris |
532 |
| J estimation for cracked cylinders under combined thermal and mechanical loading -
S. Ignaccolo, B. Drubay, B. Michel, P. Gilles |
537 |
| Limit equilibrium of elasto-plastic piecewise-homogeneous cylindrical shells with non-through cracks -
R. M. Kushnir, M. M. Nykolyshyn, V. A. Osadchuk |
542 |
| Mixed-phase simulation with fracture-path prediction mode for dynamically curving fracture -
T. Nishioka, T. Okada, M. Nakatani |
547 |
| New developments of boundary element methods in fracture mechanics -
J. Sladek, V. Sladek, J. Balas |
552 |
| New directions: analysis of cracking localization and ultimate strength of structures in civil engineering -
H. Horii, J. Inoue |
559 |
| Non-classical problems of composite failure -
A. N. Guz |
566 |
| Non-linear deformed interface corner stress characterization by effective parallel numerical methods -
M. Scherzer |
572 |
| Nonlinear continuum and atomistic modeling of dynamic fracture instabilities -
H. Gao |
579 |
| Numerical analysis of a nonlocal damage model for ductile crack growth -
M. Feucht, D. Gross |
580 |
| On creep damage evolution in thin plates -
H. Altenbach, K. Naumenko |
585 |
| On fracture of an infinite elastic body in compression along a cylindrical defect -
A. N. Guz, Yu. I. Khoma, V. M. Nazarenko |
590 |
| On the full-field elastostatic deformation of cracks using non-linear finite strain analysis -
A. D. Nurse |
595 |
| On the origin of joints in sedimentary rocks -
G. P. Cherepanov |
600 |
| Particle based analysis of fracture and flow of brittle materials -
H. Sakaguchi, H.-B. Muhlhaus |
606 |
| Quasi-brittle fracture analysis by a symmetric Galerkin boundary element method -
C. Maier, A. Frangi |
607 |