| Cover |
1 |
| Shear fracture mechanism in a recycled aluminium alloy -
D. M. Li, A. Bakker |
3 |
| Stress intensity factor histories for a 3D crack moving steadily and unsteadily -
L. Chuntu, L. Xiangping |
8 |
| Strong interaction among randomly distributed microcracks -
W. Yang, S.-L. Zhang, T. Li |
13 |
| Symmetric BEM for fracture mechanics of thin plates -
A. Frangi, G. Novati |
18 |
| The constraint of elastic-plastic crack tip fields -
A. D. Karstensen, A. Nekkal, J. W. Hancock |
23 |
| The equilibrium of dilating shear crack with rough faces -
A. V. Dyskin, A. N. Galybin |
28 |
| The unified equivalent stress intensity factor Ktheta -
K. W. Lo, T. Tamilselvan |
33 |
| Thermal stress cleaving of a thin strip using a point heat source -
A. Saimoto, Y. Imai, H. Sawada |
38 |
| Three dimensional stress analysis of crack patching -
R. J. Callinan, L. R. F. Rose, C. H. Wang |
43 |
| Three layer technique for bonded composite patch -
S. Nabaulsi, S. Mall |
48 |
| Three-dimensional crack-face weight functions for the semi-infinite interface crack -
V. Lazarus, J. B. Leblond |
53 |
| Using Mori-Tanaka method for effective moduli of cracked thermopiezoelectric materials -
Q.H. Qin, S.W. Yu |
60 |
| Variational approach to limit load evaluation in framework of the ideal rigid plastic model taking into account tensile crack formation -
S. E. Alexandrov, R. V. Goldstein |
65 |
| A method to determine constitutive properties of thin interface layers loaded in shear -
K. S. Alfredsson, U. Stigh |
69 |
| A modified CTOD design curve in consideration of mechanical heterogeneity in welds -
M.W. Shi |
74 |
| A study of testing method and mechanisms of stress corrosion cracking performed on stainless steel -
H. X. Zhao, K. Seto, M. Matsumura |
79 |
| Analysis of fatigue mechanism in locked coil wire ropes by means of fractography -
J. Woodtli, C. Hellwig |
84 |
| Borehole in situ indentation tests in floating sea ice at high temperatures ( > 0.97Tm) -
N. K. Sinha |
88 |
| Comparison of crack closure measurements using Moire interferometry and results from a Dugdale-type crack closure model -
L. J. Fellows, D. Nowell, D. A. Hills |
93 |
| Defect resistance of thin walled pipeline girthwelds -
G. F. Bowie, F. J. Barbaro, C.J. Moss, R . Denys |
98 |
| Determination of blunting line for ARMCO iron under mixed mode II III loading -
M. Srinivas, S. V. Kamat, P. Rama Rao |
105 |
| Determination of the displacement vector at the crack tip for complex kinds of loading by the use of holographic and speckle interferometry -
L. M . Lobanov, V. I. Kiryan, V. A. Pivtorak, C. V. Cherkashin |
110 |
| Effects of a thin film on screw dislocation and dislocation dipole emission -
T.Y. Zhang, C.F. Qian |
114 |
| Effects of weld strength mis-match on CTOD design curve -
H. Xue, Y. W. Shi |
119 |
| Engineering treatment model (ETM) for creep crack driving force estimation -
L. Zhonghua, W. Brocks, K.-H. Schwalbe |
123 |
| Fatigue and quantitative fractography of an Al-6061 matrix composite -
B. R. Crawford, J . R. Crifftths |
128 |
| Fatigue design and assessment of welded joints -
S. J. Maddox |
132 |
| Fracture mode tests of ductile cast iron for casks -
A. Kosaki, T. Saegusa |
139 |
| Fracture of adhesive bonds between colloidal spheres -
K. Kendall, W. Liang, C. Stainton |
144 |
| Fracture of materials with strain gradient effects -
Y. Huang, L. Zhang, T.F. Guo, K. C. Hwang |
148 |
| Indentation cracking of brittle coatings -
H. M. Jensen |
155 |
| Influence of stress raisers on copper plate fracture under uniaxial tension loading -
A. T. Mohamed |
160 |
| Inspection of small piping containing weld flaws by improved ultrasonic testing technique -
Z.C. Yang, L.M. Ni, U. Mei |
165 |
| Macroscopic evaluation of localized damage in metal by infrared thermography -
H. Sakamolo |
170 |
| Mechanisms and mechanics of debond fractures along metal matrix composite interfaces -
A. S. Argon, M. L. Seleznev, C. F. Shih, X. H. Liu |
175 |
| New methods for characterizing fracture toughness behavior -
J. D. Landes |
182 |
| Notch strength of sintered tungsten alloys -
S. Kobayashi, Y. Mutoh, Y. Hosokai |
189 |
| On interface crack growth and the criterion to determine the direction of ductile crack propagation -
S. Hao, W. Brocks, M . Kopak, K.-H. Schwalbe |
194 |
| On the modelling of interface crack yielding zones -
A. Sheveleva |
199 |
| Predictions of residual stresses caused by quenching process in aluminium 6351-T6 gas cylinder -
R. N. Ibrahim, Y. C. Lam, D. Ischenko |
203 |
| R-curve behaviour of Ai-Li-Cu-Mg alloys -
N. Eswara Prasad. M . Ramulu, G. Malakondaiah |
208 |
| Role of mode mixity on 3D stress variations near interfacial cracks -
J. K. Sinha, H. V. Tippur |
213 |
| Scatter in cleavage fracture toughness following proof loading -
H. Fowler, D. J. Smith, K. Bell |
218 |
| Shielding mechanisms in mixed mode interfacial fracture -
J. G. Swadener, K. M. Liechti |
223 |
| Small specimen fracture toughness characterization - state of the art and beyond -
K. Wallin |
228 |
| Some problems on modeling of interface fracture -
R. V. Goldstein |
235 |
| Some unresolved issues with fatigue crack closure - measurement, mechanism and interpretation problems -
M. N. James |
239 |
| Status of research aimed at predicting structural integrity -
W. G. Reuter |
246 |
| Strange multiple crack paths in ductile fracture -
A. G. Atkins |
252 |
| Tensile fracturing in dynamic compression -
S.N. Nasser |
259 |
| The effect of T stress on the near tip stress field of an elastic-plastic interface crack -
Z. L. Zhang, M. Hauge, C. Thaulow |
265 |
| The measurement of elevated temperature j integral fracture toughness in low alloy steels -
P. Nunn, A. Hellier |
270 |
| The role of weldment interfaces in fracture mechanics parameters evaluation -
A. Sedmak |
275 |
| Transgranular and intergranular fracture in Al-Si-Mg casting alloys -
Q. C. Wang, C. H. Caceres, J. F. Griffiths |
282 |
| True shear and mixed mode fracture toughness testing of materials -
K. W. La, M. O. Lai, T. Tamilsdvan |
287 |
| Vibration based detection of location and size of edge crack in beams on multiple supports -
B. P. Nandwana, S. K. Maiti |
292 |
| Vibration measurement of an edge cracked composite plate by amplitude fluctuation ESPI method -
W.C. Wang, C.H. Hwang |
297 |
| 3D dynamic interaction of cracks under impact loadin -
D. Gross, B. Cheng |
302 |
| A probabilistic approach for dynamic fragmentation of ceramics under impact loading -
C. Denoual, F. Hild, C. Cottenot |
308 |
| Analysis of dynamic crack propagation -
M. Watanabe |
313 |
| Atomistic calculations of dislocation locks: effects of hydrogen -
T. Tsuji, M. I. Baskes, R. G. Hoagland, N. R . Moody |
318 |
| Atomistic finite element models of deformation and fracture at nanoscales -
P. Klein, K. Pawlikowsky, H. Gao |
319 |
| Blast-induced fracturing around boreholes and gas-pressurised rapid crack extension -
A. Daehnke, N. Kouzniak, H. P. Rossmanith, R. E. Knasmillner |
320 |
| Characterizing the fracture of tantalum nitride films on AlN substrates through film thickness effects -
N. R. Moody, D. Medlin, D. P. Norwood |
325 |
| Cohesive force distribution of crack tip crazes in fatigue of PMMA -
W. G. Knauss |
330 |
| Constitutive equations for special linear viscoelastic composites with growing damage -
R. A. Schapery |
334 |
| Constitutive modelling of high strain-rate deformation: application to adiabatic shear banding -
Y. Estri, A . Molinari |
339 |
| Control and measurement of interface strength in the niobium-aluminum oxide system using ion beam assisted deposition -
G. S. Was, H. Ji, N. Moody |
347 |
| Dislocation emission from a three-dimensional crack - a large-scale molecular dynamics study -
S. J. Zhou, D. M. Beazley, P. S. Lomdahl, A. F. Voter, B. L. Holian |
348 |
| Dynamic analysis of a propagating interface crack -
Y. S. Ing, C. C. Ma |
354 |
| Dynamic crack propagation analysis by a boundary integral equation method -
Th. Seelig, D. Gross |
359 |
| Dynamic ductile fracture of aluminum SEN specimens an experimental numerical analysis -
J. Lee, M. T. Kokaly, A. S. Kobayashi |
364 |
| Dynamic fracture mode analysis of glass matrix composites -
M. Enoki, H. Fujita, T. Kishi |
369 |
| Dynamic interfacial cracking of thermomechanically loaded two-phase compounds -
K. P. Herrmann, A. Noe |
373 |
| Dynamic stress concentration due to an oblate spheroidal inhomogeneity -
R. Paskaramoorthy |
378 |
| Dynamical systems and the rate-dependence of cracked medium -
P. B. Béda |
383 |
| Dynamics of brittle fracture -
K. Ravi-Chandar |
388 |
| Effects of plasticity on toughness measurements in laminated systems -
M. D. Thouless |
395 |
| Energy dissipation mechanisms at copolymer toughened polymer interfaces -
E. Brown, B. Bernard, T.P. Russell |
396 |
| Fast fracture of inclined interfaces: subsonic regime -
A. Shukla, M. Kavaturu |
397 |
| Fracture electronics - application of fracture mechanics to microelectronic systems and chip packages -
B. Michel, T. Winkler, H. Reichl |
401 |
| Fracture toughness and critical pressure evaluations for polyethylene pipelines; a computational methodology and experimental validation -
P. E. O'Donoghue |
405 |
| High speed fracture in polymers and composites -
J. G. Williams |
410 |
| High strain rate fracture and impact mechanics -
I. Maekawa |
416 |
| Impact and fracture toughness properties of mild and high tensile steels -
M. Ayoub |
423 |
| Impact fracture process of plain concrete with large size aggregates by means of Hopkinson bar bundle -
C. Albertini, E. Cadoni, K. Labibes |
428 |
| Influences of interfacial adhesion on thin film mechanical property measurement by nanoindentation -
G.M. Pharr, T.Y. Tsui, C.A. Ross |
433 |
| Interfacial and near-interfacial fracture in ceramic/metal layered systems -
R.O. Ritchie, R.M. Cannon, J.M. McNancy |
434 |
| Investigations in Terradynamics -
I. V. Simonov |
435 |
| Issues in dynamic crack propagation -
F. Nilsson |
441 |
| Micromechanics measurements applied to integrated circuit microelectronics -
D.R . Clarke |
447 |
| Mixed-mode resistance curve behavior of structural adhesively bonded joints -
K. M. Liechti, J. H. Shah |
454 |
| Nanomechanical fracture-testing of phenol-formaldehyde thin films -
D. A. Boismier, M. K. Kriese, W. W. Gerberich |
459 |
| On mixed-mode dynamic crack initiation in brittle solids -
D. Rittel, H. Maigre |
464 |
| Optical measurement of stress waves and rapid crack propagation in the time domain of microseconds -
S. Suzuki, Y. Nozaki, H. Kimura |
469 |
| Quasi-atomistic models of fracture and plasticity -
R. Miller, M. Ortiz, R. Phillips, V. Shenoy, E. B. Tadmor |
474 |
| Relation between slip and energy dissipation in viscoelastic adhesives -
H. R . Brown, M. K. Chaudhury, B.-M. Newby |
478 |
| Roughness development during dynamic fracture in brittle polymer -
K. Takahashi, M. Kido |
481 |
| Some dynamic problems of structural fracture mechanics -
N. F. Morozov, Y. V. Petrov |
487 |
| Some topological aspects of transition from damage to fracture as non-linear problem of microcrack accumulation -
M. Davydova |
492 |
| Stress pulse loading of a stationary crack: experimental and numerical investigation of the displacement field -
J. M. Huntley, M. B. Whitworth |
497 |
| Strip yielding in a constrained layer -
C. H. Wang |
502 |
| Structural transitions in ensembles of defects as mechanisms of failure and plastic instability under impact loading -
O. Naimark |
507 |
| Temperature dependent crack growth behavior below Tg in an epoxy strip -
K. Ogawa, A. Misawa, M. Takashi |
514 |
| Thermal spalling of rock -
L. N. Germanovich |
519 |
| Time and stress effects on the surface morphology of PMMA under fatigue -
G. C. Pulos |
526 |
| Time dependent deformation behaviors and fatigue of Si3N4 ceramics at elevated temperatures -
K. Hatanaka, K. Oshila, H. Shiola |
531 |
| Transient surface responses of a cracked half-plane -
M. K. Kuo, Z. B. Cheng |
536 |
| Unstable neck formation as a precursor to ductile fracture during high-rate planar extension -
L. B. Freund, N. J. Sorensen |
541 |
| Wave resistance in crack propagation: lattices and homogeneous structured media - L.I. Slepyan |
548 |